View source for Template:L1® Classic, Model I Power Stand Connections

{{Classic}} '''shipped between 2003 and 2005'''

The L1 Classic had features built into its input/output panel that allowed the three amplifiers to be used separately as power amplifiers. For example, up to six {{B1}}s could be driven from an auxiliary Power Stand. See: [[Classic Extended Bass Package]]

The input/output panel as it appeared in units shipped between 2003 and 2005 is shown. 

(Units that look like this were shipped with [[Presets 1.0]] installed. An upgrade to [[Presets 2 Upgrade instructions|Presets Version 2.0]] is available and highly recommended.)


[[Image:ClassicIOPanel1.png]]

*  On the right side of the input/output panel, there are inputs for 
** All Amps In
** Amp 1 In
** Amp 2 In
** Amp 3 In

* And outputs for
** Amp 1 Out
** Amp 2 Out
** Amp 3 Out (used for {{B1}}s)


{{Classic}} '''shipped between 2006 and 2007'''

Units that shipped between 2005 and 2007  were shipped with the Version 2 [[Presets/Model I and Classic|Presets]]. The input/output panel of these later units have a blue ring around the Amp 3 output (for {{B1}}s). 


[[Image:ClassicIOPanel2.png]]

==== Detailed View of Input / Output Panel for 3 Amps ====
Note: All white inputs are '''unbalanced ''' (Amp 1, Amp 2, Amp 3 ,All Amps In)

[[Image:ClassicIOPanel2DetailRight.png]]


'''Model I'''

The {{Model I}} uses a simpler input/output panel
*  Dropped Amp 1 out, Amp 2 output found on the {{Classic}}
*  Identified by orange labels and {{L1 no link}} logo
*  [http://en.wikipedia.org/wiki/RoHS RoHS]   compliant.
*  Shipped with [[Presets 3.0]] installed. 


[[Image:ModelI-whole-I-O-panel.png|800px]]

[[Category:Classic]] [[Category:Model I]]