Difference between revisions of "T1 ToneMatch® Audio Engine / Microphone Stand Bracket"
m (first ed) |
m |
||
(21 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | [[Image: | + | {{T1 icon}} |
+ | <!-- | ||
+ | {{#Click:http://www.bose.com/controller?url=/shop_online/speakers/portable_amplification_systems/accessories/l1_tonematch_micstandbracket_acc.jsp|L1 tonematch micstandbracket acc bl lg.jpg|375px|T1® microphone stand bracket}} [[Image:L1 tonematch micstandbracket acc bl lg.jpg|right|T1™ microphone stand bracket]]--> | ||
− | + | <table><tr> | |
− | + | <td valign="top" width="250">__TOC__</td> | |
+ | <td valign="top"> | ||
+ | <big>T1 Microphone Stand Bracket is no longer available - As of January 2020</big> | ||
− | + | There is an optional microphone stand bracket for the {{T1}}. | |
− | + | This is actually two pieces. | |
+ | *The microphone stand bracket that attaches to a microphone stand and a | ||
+ | *The mounting bar that connects to that. | ||
+ | The {{T1}} sits on that mounting bar. | ||
+ | </td> | ||
+ | </tr></table> | ||
+ | === Documentation === | ||
+ | |||
+ | Here is an excerpt from the {{T1® Manual}} - page 10. | ||
+ | |||
+ | [[Image:T1manualp10MicStandBracket.png|Excerpt from the {{T1® Manual}} - page 10.]] | ||
+ | |||
+ | === Owner Comments and Alternatives === | ||
+ | |||
+ | *[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3821030784 T1 mic stand adapter, thoughts and questions] - Owners talking about the microphone stand bracket. | ||
+ | *[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/4291011005 Sight Lines and the T1<sup>®</sup>] - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket. | ||
+ | |||
+ | === Hints === | ||
+ | * The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the {{T1 nl}} will not sit properly on top of it. | ||
+ | * Secure the ToneMatch® cable to your microphone stand, above the {{T1 nl}}. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket. | ||
+ | * If you use a microphone stand with a wider than usual diameter, try removing the inserts in the clamp. — [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=956104903&r=956104903#956104903 Source: dberch on the Forum] | ||
+ | |||
+ | === Securing the T1® to the Bracket === | ||
+ | |||
+ | {{:Securing the T1® to the Microphone Stand Bracket}} | ||
+ | |||
+ | === Where to get it === | ||
+ | Click the picture below. | ||
+ | |||
+ | [[File:L1 tonematch micstandbracket acc bl lg.jpg|link=https://www.bose.com/en_us/products/speakers/speaker_accessories/t1-tonematch-audio-engine-power-supply.html#v=l1_tonematch_micstandbracket_acc_black||375px|T1® microphone stand bracket]] <!--[[Image:L1 tonematch micstandbracket acc bl lg.jpg|right|T1™ microphone stand bracket]]--> | ||
+ | <br> | ||
+ | <noinclude> | ||
---- | ---- | ||
+ | <references /> | ||
+ | </noinclude> | ||
+ | ---- | ||
+ | |||
[[Category:T1]] | [[Category:T1]] | ||
− | [[Category: | + | [[Category:Accessory]] |
Latest revision as of 07:31, 4 January 2020
T1 Microphone Stand Bracket is no longer available - As of January 2020 There is an optional microphone stand bracket for the T1 ToneMatch Audio Engine. This is actually two pieces.
The T1 ToneMatch Audio Engine sits on that mounting bar. |
Documentation
Here is an excerpt from the T1 ToneMatch® Owners Manual - page 10.
Owner Comments and Alternatives
- T1 mic stand adapter, thoughts and questions - Owners talking about the microphone stand bracket.
- Sight Lines and the T1® - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket.
Hints
- The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the T1 ToneMatch® Audio Engine will not sit properly on top of it.
- Secure the ToneMatch® cable to your microphone stand, above the T1 ToneMatch® Audio Engine. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket.
- If you use a microphone stand with a wider than usual diameter, try removing the inserts in the clamp. — Source: dberch on the Forum
Securing the T1® to the Bracket
- The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the T1 ToneMatch® Audio Engine will not sit properly on top of it.
- correct - bevel running down, facing you
- incorrect (upside down)- bevel on opposite side, away from you
This is how I secure the T1® to the T1® Microphone Stand Bracket[1]
- There is a velcro strap on the black ToneMatch cable.
- I use the velcro to secure the ToneMatch cable to the microphone stand just above the Microphone Stand Adapter (the thing that clamps around the mic stand).
- Then I insert the ToneMatch cable into the T1®. It locks into place.
- At this point, most people would put the T1® on the bracket and attach the other cables.
- I insert all the other cables into the T1® before I put it on the bracket. I do it this way because I have all my cables strapped to the microphone stand (I don't take them off between gigs). So there's no hanging stress from those either.
- Finally, I set the T1® on top of the bracket.
In the picture above, I am using all the inputs and the cables are heavy. But since I have all the cables secured by a velcro strap, there's no chance that the T1® will come off the microphone stand bracket.
The white cable is a network cable (Cat-5) instead of the ToneMatch® cable
— source
Here's how I have one of my microphone stands setup. The T1® Microphone Stand Bracket is attached and I never remove it.
All the cables are also strapped to the microphone stand. I leave the cables attached all the time. This saves a great deal of time during setup and teardown.
I used a white background so that you could see the wires. Normally they don't stand out like this visually. Notice that even if the T1® were to get knocked off the bracket the cables are acting as safety tethers.
- View from the Back
- Ready to Pack Up
You can see that the cables are strapped to the microphone stand.
- Packed, ready to zip up
The black bag is one of the original Cylindrical Radiator® bags that came with my L1®. Years ago I got some heavy duty bags for the Cylindrical Radiator® and it turns out that the stock bags work great for holding microphone and light stands.
- Remember to pack the Bracket (arm) in the T1® Lid.
Comments? Please join the discussion on the Bose L1® Forum
Where to get it
Click the picture below.
- ↑ Original discussion about using the T1® Microphone stand adapter