Difference between revisions of "L1 Pro32 Half Stack"
(Created page with ";Can I operate the L1 Pro32 with only the lower section of the line array? : Sometimes there is not sufficient height to use the full array ;Yes Notes: * For best results, en...") |
m |
||
| Line 3: | Line 3: | ||
;Yes | ;Yes | ||
| − | + | :The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32<br>Source: Page 7 of the [[Media:L1 Pro32 Owners Guide.pdf|L1 Pro32 Owners Guide]] | |
| + | |||
* For best results, ensure array is at ear level for listeners | * For best results, ensure array is at ear level for listeners | ||
* Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance. | * Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance. | ||
Revision as of 21:27, 8 July 2021
- Can I operate the L1 Pro32 with only the lower section of the line array?
- Sometimes there is not sufficient height to use the full array
- Yes
- The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32
Source: Page 7 of the L1 Pro32 Owners Guide
- For best results, ensure array is at ear level for listeners
- Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance.
- It’s a valid use case to use only the bottom array section. In fact, the EQ automatically adjusts to compensate.
Craig Small - Bose