Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"
m |
m (Introduction) |
||
Line 1: | Line 1: | ||
The {{Model II}} can accept two inputs. [[Image:ModelIIInputs.gif|right|Model II inputs]] | The {{Model II}} can accept two inputs. [[Image:ModelIIInputs.gif|right|Model II inputs]] | ||
− | + | This makes it easy for two performers to connect their own T1®s to a {{Model II nl}} Power Stand. | |
− | The | + | === {{ToneMatch}} Connection === |
+ | The {{ToneMatch}} connection is specifically designed for a {{T1}}. The [[ToneMatch® Cable|ToneMatch® cable]] is supplied with the {{T1}} and uses a male [[Ethercon]] connector at both ends. | ||
=== Analog Connection === | === Analog Connection === |
Revision as of 20:43, 6 December 2008
The L1 Model II can accept two inputs.
This makes it easy for two performers to connect their own T1®s to a L1® Model II Power Stand.
ToneMatch® Connection
The ToneMatch® connection is specifically designed for a T1 ToneMatch Audio Engine. The ToneMatch® cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.
Analog Connection
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.
Note: A T1® connected to the the Analog input will require the optional T1 ToneMatch® Audio Engine power supply.