Difference between revisions of "PS1 Powerstand/ Preventing Incorrect Connections"
m (includeonly) |
m (<references />) |
||
Line 8: | Line 8: | ||
Here is a link to the [http://bose.infopop.cc/groupee_files/attachments/7/6/3/7631072022/7631072022_BoseWplugsR.jpg?ts=46C3A01E&key=FC41413FEA9CB498C5F2BA12274DB75C&referrer=http%3A%2F%2Fbose.infopop.cc%2Feve%2Fforums%2Fa%2Fga%2Ful%2F8631072022%2Finlineimg%2FY%2FBoseWplugsR.jpg full sized version of the image]. | Here is a link to the [http://bose.infopop.cc/groupee_files/attachments/7/6/3/7631072022/7631072022_BoseWplugsR.jpg?ts=46C3A01E&key=FC41413FEA9CB498C5F2BA12274DB75C&referrer=http%3A%2F%2Fbose.infopop.cc%2Feve%2Fforums%2Fa%2Fga%2Ful%2F8631072022%2Finlineimg%2FY%2FBoseWplugsR.jpg full sized version of the image]. | ||
− | <includeonly>This tips originally submitted by [[User:DanCornett|Dan Cornett]]<ref>[[PS1 Powerstand/ Preventing Incorrect Connections|Dan's original tip about plugs for unused inputs]</ref> | + | <includeonly>This tips originally submitted by [[User:DanCornett|Dan Cornett]]<ref>[[PS1 Powerstand/ Preventing Incorrect Connections|Dan's original tip about plugs for unused inputs]]</ref> |
[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/7631072022 Preventing incorrect connections] in the {{forum}}</includeonly> | [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/7631072022 Preventing incorrect connections] in the {{forum}}</includeonly> | ||
<noinclude> | <noinclude> | ||
Line 28: | Line 28: | ||
[[Image:BosewplugsrArrows.png]] | [[Image:BosewplugsrArrows.png]] | ||
---- | ---- | ||
+ | <references /> | ||
[[Category:PS1 Powerstand]] | [[Category:PS1 Powerstand]] | ||
</noinclude> | </noinclude> |
Revision as of 23:22, 15 August 2007
Cover Unused Inputs
To avoid mishaps at a gig cover or plug the unused inputs on your PS1 Powerstand. This picture shows white nylon caps in the lesser used inputs of a L1 Classic Powerstand. The L1 Model I does not have the inputs in the white area near the top right.
Here is a link to the full sized version of the image.
Original Narrative for this tip
- Somewhere (that I can't find now) I read a post about getting some plugs to cover the normally unused inputs to minimize or prevent mistakes during setup (such as putting a 1/4 intended for channel 4 into the channel 2 "Insert" socket, or plugging the B1 cable into Amp 2 output) - particularly during dim lighting.
- After seeing that happen a couple of time with novice helpers (which I caught before they got used that way), I was inspired to look around the local hardware store (it happened to be at a Sears hardware, but they are pretty standard parts you'll find if the store carries "bins" of loose hardware, nuts, washers, and other small fittings). I found these 1/4" plastic plugs, in either black or white. I chose white, to help with the contrast in dim light.
- I initially tried something that stuck up further from the socket (small grey twist-on wire caps fit nicely) to make it easier to remove them, but then the door wouldn't close (the closed door comes really close to the channel 2 insert socket).
- These plugs work for the unused Speakon sockets, too. You just have to squeeze them a bit into an oval to get them inserted.
-- Dan Cornett[1] in the Bose® Pro Portable PA Community
Another look with arrows
- ↑ Dan Cornett Preventing incorrect connections