The Bose Professional Portable PA Encyclopedia

From Bose Portable PA Encyclopedia
Revision as of 04:06, 21 May 2021 by ST (talk | contribs)
Jump to navigation Jump to search

<seo title="Bose Portable PA Encyclopedia FAQ & Wiki" metakeywords="Bose L1 Pro, Bose L1, Bose specifications, F1, 812, subwoofer, line array, L1 Compact, L1®, ToneMatch, T1®, Model I, Model II, Classic, PackLite, PAS FAQ, L1 FAQ, B1 Bass Module, B2 Bass Module, L1 Cylindrical Radiator, feedback, L1 DJ,power output, watts, Personalized Amplification System, help, power" metadescription="The Bose® Professional Portable Encyclopedia FAQ & Wiki includes official documentation, specifications, technical details, FAQs and L1 Owner Community hints, tips, and real world experience." google-site-verification="oRgTsJtdmAXjod2zZPyXllzxvGKNcQ_MHf2DobmCZwo" />


The Bose Portable PA Encyclopedia
Your source for information, tips, tricks, and
FAQs about the Bose Portable PA family of products.
There are 956 articles about Bose Portable PA products here.
The Kemper Profiling Amp

The Kemper Profiling Amp



L1 Pro This information is applicable to the L1 Pro

The L1 Pro models share a common user interface and the L1 App. This page has links to resources for all three models and the Bose products that integrate with them.

If you have an L1 Pro, check out the L1 Pro Frequently Asked Questions

L1 Pro Family

Bose Pro announced the Bose L1 Pro line on October 26, 2020.


Bose L1 Pro page bose.com

Bose App to control L1 Pro and S1 Pro+

T4S/T8S ToneMatch® Mixers

Learn about the T4S/T8S ToneMatch mixer

If you have an L1 Pro, check out the L1 Pro Frequently Asked Questions


Documentation


L1 Pro Firmware

L1 Pro Firmware


Resources

L1 Pro Application Guide

Bose Portable PA Brochure

L1 Pro Family Selection Guide (product comparison)

Choosing the L1 Pro System That's Right for You (Youtube) / (Facebook livecast)

Bose L1 Pro Overview Videos

Bose L1 Pro Technical Training Videos

L1 Pro and the Mobile DJ - video L1 Pro Technical Certification Course (no charge, but you must register)

Articles

Should I get an L1 Pro8 or L1 Pro16?

Should I get an L1 Pro16 or L1 Pro32?

Do I Need to Upgrade from the L1 Compact to the L1 Pro8?

Do I Need to Upgrade from the L1 Model II to the L1 Pro32?

L1 Pro Do You Need All Three

Two L1 Pro16 or One L1 Pro32

S1 Pro+ x 2 vs L1 Pro8 with T4S

Which L1 Pro for Singer/Songwriter/Electric Guitarist


T1 Compatibility With L1 Pro Systems

Mixer to L1 Pro Connect your third-party mixer to any L1 Pro

L1 Pro and SimpleSync Connect L1 Pro to Bose Smart Speaker Group

L1 Pro32 Separating the Sections of the Mid-High Array

L1 Pro16 Wobble

Comparing Specifications

Comparing L1 Pro Models

Bose L1 Pro8 Compared to L1 Pro16

Two L1 Pro8 or One L1 Pro16

Bose L1 Pro16 Compared to L1 Pro32

Two L1 Pro16 or One L1 Pro32

Comparing L1 Pro Power Stands to Subs

Sub Comparison

Legacy to L1 Pro Models

Bose L1 Compact Compared to L1 Pro8

Bose L1 Model 1S Compared to L1 Pro16

Bose L1 Model II Compared to L1 Pro32

Throw Over Distance

Quick Tips

L1 Pro Line Out

The XLR Line Output from any L1 Pro contains the sound from all inputs (1, 2, 3, Bluetooth, and ToneMatch Port). That includes

  • ToneMatch Presets
  • Tone Controls
  • Reverb
  • The signal from a ToneMatch mixer connected to the ToneMatch port including ToneMatch Presets, zEQ, Reverb, Effects.

The sound is NOT affected by the L1 Pro System EQ setting.


L1 Pro ToneMatch Switch

The ToneMatch switch selects the ToneMatch Preset applied to the input.

It does not adjust the channel’s gain staging or level. It does not function like a MIC/LINE switch found on some powered loudspeakers or mixers

ToneMatch Preset Behavior:

  • MIC applies the microphone ToneMatch Preset
  • INST applies the acoustic guitar ToneMatch Preset
  • OFF disables ToneMatch processing

Use MIC for microphones and INST for acoustic guitar. You can change the ToneMatch Presets using the Bose App

Channel ToneMatch Button: Select the ToneMatch preset for an individual channel. The corresponding LED will illuminate white while selected.

More information about ToneMatch Presets


L1 Pro Daisy Chain

Want to connect one or more L1 Pro systems together? See L1 Pro Daisy Chain

L1 Pro System EQ

The System EQ feature on the L1 Pro systems applies an EQ preset to the master output. This is similar to a graphic equalizer on traditional analogue mixers, but it uses four presets instead for quick access. read more — L1 Pro System EQ

L1 Pro32 Half Stack

Can I operate the L1 Pro32 with only the lower section of the line array?
Sometimes there is not sufficient height to use the full array
Yes
The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32
Source: Page 7 of the L1 Pro32 Owners Guide
  • For best results, ensure array is at ear level for listeners
  • Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance.
It’s a valid use case to use only the bottom array section. In fact, the EQ automatically adjusts to compensate.
Craig Small - Bose


Half Stack Not Recommended for Small Gigs

Running only the lower section of the Line Array is a workaround when there isn't enough ceiling clearance to use both sections. For small gigs, turn down the volume on the L1 Pro32, don't run without the top section of the array because

  • You'll need to elevate the system so the array is at ear level for the audience. Otherwise, the sound will be muffled
  • You will reduce your projection over distance. The sound will drop off more over distance.
  • You may need to turn up the volume louder than if you were using the full array. As a result, you increase the likelihood of feedback.

L1 Pro Emergency Kit

L1 Pro This information is applicable to the L1 Pro

S1 Pro+  This information is applicable to the S1 Pro+ system

These are extras and spares I carry in addition to the items I know I will need at a gig.

Emergency and Spares Kit for L1 Pro and S1 Pro(+)
Item Reason
IEC Power Cord They got lost, and this can be used with an XLR cable to substitute for a SubMatch Cable
XLR cable It's always good to have a spare. Use with an IEC Power Cord to replace a SubMatch Cable
1/4-inch (6.3mm) Tip-Ring-Sleeve Cable Connect mixers or devices with balanced connections to the L1 Pro.
1/4-inch (6.3mm) Tip-Sleeve Cable This is your basic instrument cable. It's always good to have a spare.
XLR Female to 1/4-inch (6.3mm) Tip-Ring-Sleeve Cable To connect Line Level Output from an L1 Pro or third-party mixer to Channel 3 input of an L1 Pro or S1 Pro+
1/8-inch (3.5 mm) Tip-Ring-Sleeve Cable Use this to connect the headphone output of a consumer device to L1 Pro or S1 Pro(+) channel 3 input
CAT5 cable Connect ToneMatch Mixers (T1/T4S/T8S) to the L1 Pro ToneMatch Port
ToneMatch Power Supply In case I need to run two ToneMatch Mixers to a single L1 Pro
Dynamic Microphone This is a spare; the one to use when you have guest speakers making announcements
Microphone Clip They break
Multi-bit Screwdriver Tighten, loosen, everything as needed
Gaffers Tape Tie down cables, or quick repairs
Labels with contact information I have labels on all my gear, but it's good to have spares in case they fall off

FAQ

General Questions

 Expand all | Collapse all

Where did these questions and answers come from?

These are questions that come from people who use Bose L1 Pro systems. The answers are from Bose, authoritative sources, best practices in the field and first-hand experiences.


How much coverage can I get?

Several factors determine how large an area you can cover with your sound.

  • The distance to the listener farthest away
  • The noise level in the listening area
  • Walls and boundaries that affect reflections that support low frequencies

Use the chart below to see the performance over distance of the different models. This will help you to predict how well you can be heard at a distance.

This is the chart used to estimate critical distance and drop-off over distance.

Throw Over Distance

There is a lot more information, including comparisons to legacy models, in this article Throw Over Distance


Are the columns made of plastic?

Arrays on all units feature an extruded aluminum sleeve. Perforated grille on the front, solid on the back. Source: Craig Small


Do the L1 Pro systems wobble?

These comments apply to all L1 Pro Models

Pro16 "wobble" is an exaggerated myth. There are no line array systems with zero wobble, and the L1 Pro16 is within the range of legacy and competitor systems with regard to play in the array. The extension is a durable polypropylene plastic with a sufficient wall thickness, which has proven to have a high flexural strength and has passed all quality, reliability (thousands of mating cycles), and safety tests. Performance of the system is not affected, as the connections between the array, extender and bass module are very secure and would require a significant amount of force to damage. The L1 Pro16, all current L1 Pro systems, and legacy L1 products meet the same horizontal force stability requirements (or tip testing requirements). Lastly, the electrical connectors used in the L1 Pro16 are the same that have been used on legacy L1 products, which have 17+ years of field usage and satisfactory performance.

Source: Craig Small, Product Manager, Bose Professional on Facebook 2020-12-29

The L1 Pro system extensions are made of a very durable polypropylene with sufficient wall thickness, proven to have a high flexural strength and meets our rigorous quality, reliability, and safety testing requirements. Reliability testing includes mating and un-mating of the array, extension, and subwoofer components that simulates 10 years of product life, and revealed no degradation in fit or stability. Additionally, the L1 Pro16 meets the same horizontal force stability requirements, or tip testing requirements, that all our L1 legacy products, and current family of L1 Pro products meet. The margin in the extension, array, and subwoofer fit experienced by some users is common with portable line array designs, including our legacy L1 systems.

Source: Craig Small, Product Manager, Bose Professional on Facebook 2021-03-26


New Owner Questions

 Expand all | Collapse all

How do I update the firmware?

Use the Bose Updater to update compatible Bose products. This web-based updater is an easy way to keep your product up-to-date with the latest features and improvements.

Compatibility Information

To use the Bose updater, use a compatible computer operating system and web browser. While other operating systems and browsers might work, the updater is designed for those listed below.

Compatible operating systems
  • Windows 10 or later
  • macOS (the latest two versions)
Compatible web browsers
  • Chrome
  • Edge
  • Firefox
  • Safari


I just got my L1 Pro. Do I NEED to update the firmware?

The only way to know is to go to the Bose Updater. Your system may have been manufactured before the latest update was available.


For more information see L1 Pro Firmware


What is the Bose App and how do I get it?

The Bose App allows you to control settings on the L1 Pro (volume/bass/treble/reverb) and access advanced features like ToneMatch Presets and Scenes.


Operating the L1 Pro General Questions

 Expand all | Collapse all

What is System EQ on the L1 Pro Power Stand?

The System EQ feature on the L1 Pro systems applies an EQ preset to the master output. This is similar to a graphic equalizer on traditional analogue mixers, but it uses four presets instead for quick access:

  • Off - i.e. 'Flat', no EQ applied.
  • Live - best for live performances
    • Slight reduction in 100Hz, bump around 1KHz, slight reduction at 10KHz
  • Music - best for DJ sets.
    • Increase around 100Hz, increase around 10KHz
  • Speech - best for just dialogue, if using the system for public address.
    • Reduction between 100Hz and 500Hz, bump around 2KHz-3KHz, bump over 11KHz

The System EQ setting will not affect the system's XLR line output audio.


Can I swap the columns from different models?

No. While the column arrays and extensions of the L1 Pro8 and L1 Pro16 will fit each other, no sound comes out.


L1 Pro32, can I use only the lower section of the array?

Yes

The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32
Source: Page 7 of the L1 Pro32 Owners Guide
  • For best results, ensure the array is at ear level for listeners
  • The L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance.
It’s a valid use case to use only the bottom array section. In fact, the EQ automatically adjusts to compensate.
Craig Small - Bose
Half Stack Not Recommended for Small Gigs

Running only the lower section of the Line Array is a workaround when there isn't enough ceiling clearance to use both sections. For small gigs, turn down the volume on the L1 Pro32, don't run without the top section of the array because

  • You'll need to elevate the system so the array is at ear level for the audience. Otherwise, the sound will be muffled
  • You will reduce your projection over distance. The sound will drop off more over distance.
  • You may need to turn up the volume louder than if you were using the full array. As a result, you increase the likelihood of feedback.


ToneMatch Mixers (T1/T4S/T8S) and the L1 Pro

 Expand all | Collapse all

How do I connect a T4S to the L1 Pro

In addition to the three inputs on the L1 Pro systems, you can add a T4S. When you do,

  • The inputs and controls on the T4S operate independently from the inputs and controls on the L1 Pro
  • The three inputs on the L1 Pro operate independently of the T4S. The operation of the controls of the L1 Pro is the same whether or not a T4S is connected via the ToneMatch port.

You can connect from the T4S to one or two L1 Pro systems using the ToneMatch ports.

For full details see: T4S to L1 Pro


How do I connect a T8S to the L1 Pro

In addition to the three inputs on the L1 Pro systems, you can add a T8S. When you do,

  • The inputs and controls on the T8S operate independently from the inputs and controls on the L1 Pro
  • The three inputs on the L1 Pro operate independently of the T8S. The operation of the controls of the L1 Pro is the same whether or not a T8S is connected via the ToneMatch port.

You can connect from the T8S to one L1 Pro system using the ToneMatch port. There are also XLR and ¼″ (6.3 mm) Tip‑Ring‑Sleeve outputs.

For full details see: T4S to L1 Pro


How do I connect a T1 to an L1 Pro

Can I use the T1 ToneMatch Audio Engine with the L1 Pro System[1]s?

Yes using two connections

  1. ToneMatch port supplies power to the T1 ToneMatch Audio Engine
  2. An analog cable from the T1 ToneMatch Audio Engine Master Output to one of the L1 Pro channels (preferably channel 3)
Required
  1. ToneMatch cable (these were included with the T1 ToneMatch Audio Engine), or network cable (CAT5/6/7) up to 50 feet
    OR you can use a ToneMatch Power Supply instead of connecting to the L1 Pro System[1] for power.
  2. ¼″ (6.3 mm) Tip‑Ring‑Sleeve cable. This is the preferred cable for best results, but you can use a ¼″ (6.3 mm) Tip‑Sleeve cable. You'll be more vulnerable to line noise but if your cable length is less than 20-25 feet, this can work.
Connections and initial settings
  1. On the L1 Pro, turn off the system and turn down the volume on all channels
  2. On the T1 ToneMatch Audio Engine, turn the Master Volume off
  3. Power: Connect the L1 Pro[1] ToneMatch port to the T1 ToneMatch Audio Engine ToneMatch port using the ToneMatch cable
  4. Audio: Connect the T1 ToneMatch Audio Engine Master Output to the L1 Pro[1] channel 3 unless you are already using it for Bluetooth or another sound source. This leaves channels 1 and 2 open for other sound sources.
    • On channel 3, set Treble and Bass at 12:00 (flat)
    • If you connect to L1 Pro[1] channel 1 or channel 2
      • On the L1 Pro[1] channel:
        • Turn off the ToneMatch Preset
        • Turn off Reverb
        • Set Bass and Treble to 12:00 o'clock
    • For best results, use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable for a balanced connection
Power up and gain staging
Summary: Set the L1 Pro channel volume and the T1 ToneMatch Audio Engine Master Volume to 12:00 o'clock and adjust from there as necessary
Details
  1. Turn on the L1 Pro (normally you would turn on the power amplifier last, but you need it turned on to power the T1 ToneMatch Audio Engine)
  2. On the T1 ToneMatch Audio Engine
    • Attach a signal source to one of the T1 ToneMatch Audio Engine, e.g., a microphone
    • Turn on the power
    • Turn up the Trim until you see a solid green light on the channel trim
    • Turn up the channel volume to 12:00 o'clock
  3. On the L1 Pro
  4. On the T1 ToneMatch Audio Engine
    • Turn up the Master volume to the desired level
Why do you need two connections?

Regarding T1 compatibility with the L1 Pro systems: The architecture of the T1 ToneMatch differs from that of the T4S and T8S ToneMatch mixers and is not compatible with the L1 Pro’s S/PDIF audio architecture.

The T1 ToneMatch is based on S/PDIF, but with a proprietary connection for legacy L1 products which allows them to carry other data such as firmware updates. The T4S and T8S ToneMatch mixers use an updated version of ToneMatch protocol, which is compatible with legacy L1 products, but also fully compatible with S/PDIF. Since the L1 Pro architecture is designed to use standard S/PDIF protocol, the T1 ToneMatch cannot communicate the same way and is unable to send audio via the ToneMatch port.

Although the T1 ToneMatch is unable to send audio it can still receive power from an L1 Pro system via the ToneMatch port. In order for the L1 Pro system to receive audio, users of the T1 ToneMatch would need to connect the analog main out of the T1 to an available input on the L1 Pro system.

Source: Bose l1 Pro with Tonematch Mixers (T1, T4s, T8s)


Why use a T1 ToneMatch Audio Engine with the L1 Pro System[1]s?

* Use the T1 ToneMatch Audio Engine to add three more XLR/Combo jack inputs and channel 4/5 dual input (combines stereo to mono). You give up the third input on the L1 Pro System[1] but get four inputs — a net gain of three inputs

  • The L1 Pro32 built-in mixer has ToneMatch Presets, Bass, Treble, and Reverb.

If you already own a T1 ToneMatch Audio Engine:


Inputs and Connections

 Expand all | Collapse all

Is MIC/INST/OFF the same as a MIC/LINE switch?

No. The MIC/INST/OFF switch is NOT a MIC/LINE selector like those found on many powered loudspeakers.

The switch does not change input sensitivity or gain.
It affects only the ToneMatch Preset applied to the input.

ToneMatch Preset Behavior:

  • MIC applies the microphone ToneMatch Preset
  • INST applies the acoustic guitar ToneMatch Preset
  • OFF disables ToneMatch processing

Use MIC for microphones and INST for acoustic guitar. You can change the ToneMatch Presets using the Bose App

Channel ToneMatch Button: Select the ToneMatch preset for an individual channel. The corresponding LED will illuminate white while selected.

More information about ToneMatch Presets


Does the MIC/INST/OFF switch change the input gain?

No. The MIC/INST/OFF switch does not change input sensitivity or gain.

It only selects the ToneMatch Preset applied to the input.
It does not adjust the channel’s gain staging or level.

ToneMatch Preset Behavior:

  • MIC applies the microphone ToneMatch Preset
  • INST applies the acoustic guitar ToneMatch Preset
  • OFF disables ToneMatch processing

Use MIC for microphones and INST for acoustic guitar. You can change the ToneMatch Presets using the Bose App

Channel ToneMatch Button: Select the ToneMatch preset for an individual channel. The corresponding LED will illuminate white while selected.

More information about ToneMatch Presets


How do I connect a monitor?

* You can connect the L1 Pro Line Out to a monitor.

The XLR Line Output from any L1 Pro contains the sound from all inputs (1, 2, 3, Bluetooth, and ToneMatch Port). That includes

  • ToneMatch Presets
  • Tone Controls
  • Reverb
  • The signal from a ToneMatch mixer connected to the ToneMatch port including ToneMatch Presets, zEQ, Reverb, Effects.

The sound is NOT affected by the L1 Pro System EQ setting.

  • If you have an S1 Pro, see L1 Pro to S1 Pro
  • If you have an S1 Pro+, see L1 Pro to S1 Pro+
  • If you prefer to run your inputs to the S1 Pro+ and send the output to the L1 Pro, see S1 Pro+ To L1 Pro
  • If you have a mixer, you may prefer to send the monitor mix from the mixer to the monitors instead of the L1 Pro Line Out

The L1 Pro was designed to be placed behind the performers. If you can do that, you may not need a monitor — you should be able to hear yourself clearly. For more about that, see The L1® Approach and the History Of Amplification.


How do I connect a third-party mixer?

Use the Mixer Mono Output and connect it to L1 Pro Channel 3.

If the mixer does not have a mono output, pan all inputs hard LEFT and use the LEFT output. We will now refer to that as the Mixer Mono Out.

If the mixer has XLR outputs:

Mixer Mono Out → XLR Female → ¼″ (6.3 mm) Tip‑Ring‑Sleeve → L1 Pro Channel 3

If the mixer has ¼″ (6.3 mm) Tip‑Ring‑Sleeve outputs:

Mixer Mono Out → ¼″ (6.3 mm) Tip‑Ring‑Sleeve → L1 Pro Channel 3

For more details, see Mixer to L1 Pro.


Can I use XLR cables from my mixer into Channels 1 or 2?

You can, and it might work. Click for details

And yes, there are even pictures of this in the L1 Pro manuals.

However, using XLR‑to‑XLR connections from a mixer into Channels 1 or 2 can lead to problems.


1. Some mixers have a MIC/LINE or ‑20 dB switch on the XLR output

If your mixer can switch its XLR output to MIC or ‑20 dB, then engage that switch and the XLR‑to‑XLR connection should work.

If not, use Mixer Mono Out → XLR Female → ¼″ (6.3 mm) Tip‑Ring‑Sleeve → L1 Pro Channel 3.


2. Most mixer XLR outputs are line‑level, which is a poor match for the L1 Pro’s mic‑level XLR inputs

This mismatch can cause:

  • Input clipping
  • Harsh distortion
  • Unpredictable behavior


3. You can sometimes “make it work,” but it’s not ideal

You might avoid clipping by:

  • Turning down the mixer output
  • Turning down the L1 Pro channel volume

However:

  • Lower mixer output reduces signal‑to‑noise ratio (more hiss)
  • Very low L1 Pro channel settings give almost no usable range
  • Volume may jump from too quiet → too loud with tiny adjustments


4. Channel 3 avoids all of these issues

Channel 3 is designed for line‑level sources and provides:

  • Proper level matching
    • Lower input sensitivity (less likely to clip/distort)
    • Full +24 dBu headroom
  • Predictable behavior
    • No ToneMatch presets
    • No Reverb
    • No DSP gain steps

This is why the recommended method is:

Mixer Mono Out → XLR Female → ¼″ (6.3 mm) Tip‑Ring‑Sleeve → L1 Pro Channel 3


Why are the ¼″ (6.3 mm) Tip‑Ring‑Sleeve inputs on Channels 1 and 2 louder than the ¼″ (6.3 mm) Tip‑Ring‑Sleeve input on Channel 3?

By design, the input sensitivity of the Channel 3 ¼″ (6.3 mm) Tip‑Ring‑Sleeve input is lower than the ¼″ (6.3 mm) Tip‑Ring‑Sleeve inputs on Channels 1 and 2. This allows Channel 3 to handle line‑level sources with less risk of clipping.

You can achieve the same overall output level from Channel 3, but you may need to turn the Channel 3 volume control higher to do it.

This difference is most noticeable when connecting a third‑party mixer to the L1 Pro.

People tend to hear louder as better, so you may prefer to use Channels 1 and 2 instead of 3, but you can get the same result by turning up the volume on Channel 3, leaving the other channels available.

For more information, see Mixer to L1 Pro.


Multiple L1 Pro Systems

 Expand all | Collapse all

What can I do with multiple L1 Pros?

Multiple L1 Pros can be used together, but each system still operates independently.

What they can do
  • Pass audio from one unit to another using the L1 Pro Line Out (Daisy Chain)
With a mixer
  • Play the same signal if you feed each unit from a mixer
  • Work as a stereo pair when fed LEFT and RIGHT outputs from a mixer

What they can’t do

  • Share their internal inputs with each other
  • Combine all inputs from two units into one system
  • Link wirelessly over Bluetooth (Bluetooth is receive‑only)

For details on specific setups, see the related questions below.


How do I connect one L1 Pro to another L1 Pro (daisy chain)?

Use XLR Female → ¼″ (6.3 mm) Tip‑Ring‑Sleeve to connect

From the first L1 Pro Line Out
To the second L1 Pro Channel 3 ¼″ (6.3 mm) Tip‑Ring‑Sleeve input.

For complete details, see L1 Pro Daisy Chain.


Can I use Bluetooth to connect two L1 Pros?

No

L1 Pro systems can receive Bluetooth audio from a Bluetooth source (for example, a phone, tablet, or computer). They cannot send Bluetooth to another L1 Pro, and even if they could, the latency (delay) would make this unusable in a live sound setting.

For more information see L1 Pro Daisy Chain


Can I run two L1 Pros as a single mono system?

You can send the output of one L1 Pro to another (Daisy Chain), but you can't send the output of the second one back to the first. That is: You cannot take the three inputs on each L1 Pro and hear all six inputs through both units.

Each unit only plays the signals connected to its own inputs.

If you want both L1 Pros to play the same mono mix, use a mixer and send the same output to each unit:

From the mixer Mono Output → L1 Pro (Left) Channel 3 ¼″ (6.3 mm) Tip‑Ring‑Sleeve input
From the mixer Mono Output → L1 Pro (Right) Channel 3 ¼″ (6.3 mm) Tip‑Ring‑Sleeve input

This gives you two identical mono feeds, but the L1 Pros still operate as separate systems.

For more details, see Dual Mono.


How do I connect two L1 Pros for stereo?

To run two L1 Pros in stereo, send the LEFT and RIGHT outputs from your mixer to each L1 Pro separately.

From the mixer LEFT Output → L1 Pro (Left) Channel 3 ¼″ (6.3 mm) Tip‑Ring‑Sleeve input
From the mixer RIGHT Output → L1 Pro (Right) Channel 3 ¼″ (6.3 mm) Tip‑Ring‑Sleeve input

Each L1 Pro then reproduces its own channel (Left or Right), creating a stereo pair.

For more details, see Mixer to L1 Pro.


Can I connect my L1 Pros so they share inputs?

No

  • You cannot take the three inputs on each L1 Pro and hear all six inputs through both units.
  • While you can daisy chain the inputs of the first L1 Pro to a second L1 Pro, you cannot send the inputs of the second L1 Pro back to the first. Doing so will create a feedback loop.

For more details, see L1 Pro Daisy Chain.


Troubleshooting

 Expand all | Collapse all

The L1 Pro sounds muddy

Symptoms

No mid-highs, low volume, it's all bass

Possible Causes

L1 Pro speaker column or extension not seated properly.

Solutions

Make sure the column arrays are seated firmly in the power stand


Excessive Hiss

Hiss with nothing connected to the L1 Pro inputs when I turn up the volume

Symptoms

Hiss with nothing connected, volume turned up

Possible Causes

with no input, turning up the volume amplifies noise

Solutions

turn down the volume or mute any unused channels For more details see L1 Pro Hiss


Hiss when connecting the LINE OUT from an L1 Pro to a second L1 Pro with an XLR cable

Symptoms

Hiss, noise, clipping

Possible Causes

LINE OUT from the first L1 Pro is line-level.
XLR input on the second L1 Pro is microphone-level

Solutions

Connect the first L1 Pro LINE OUT to the second L1 Pro Channel 3 input The cable: Female XLR to 1/4-inch (6.3mm) Tip-Ring-Sleeve cable For more details see L1 Pro Daisy Chain


Hiss when connecting a mixer to the L1 Pro Channels 1 or 2 with an XLR cable

Symptoms

Hiss, noise, clipping

Possible Causes

No causes provided

Solutions

Connect the mixer mono output to the L1 Pro Channel 3 input The cable: Female XLR to 1/4-inch (6.3mm) Tip-Ring-Sleeve cable For more details see Mixer to L1 Pro


Feedback Issues

 Expand all | Collapse all

What causes microphone feedback?

Feedback happens when the sound from the loudspeaker is louder at the microphone than the sound of the voice. If the microphone “hears” more speaker than performer, the system will feed back.

For a full explanation and diagrams, see Feedback / Microphone.


How do I set gain staging to reduce feedback?

Set your source at its loudest performance level, then raise the Trim until you get solid green with occasional yellow (never red). Once Trim is set, use channel volume for mixing — not Trim.


Details for the T4S/T8S

The first thing you do when connecting a sound source to your ToneMatch mixer is set the input trim. This is gain staging. Then you can set the ToneMatch Preset for your source. We'll do both in the short video below.

At the beginning of the video, I'm doing a factory reset so we don't bump into any old settings. You do not have to do a factory reset before you set the input trim on your ToneMatch mixer.

The trim controls across the top will be different
The trim controls across the top of your ToneMatch mixer will likely be different. This is because the output levels of your input sources will likely be different. This is normal.
Mixing - Use the volume controls not the trim controls
Once you have set the input trim, you should not have to change it until you change the input source (e.g. different microphone, singer, or instrument). Do not use the trim control to change the channel volume. Use the channel volume control.
Scenes
Saved Scenes do not capture the trim, channel volume, or Master Volume settings.
Set Up Your Source

Set your source at the maximum that it will be when performing.

  • Microphone
Sing directly into the microphone using close microphone technique (lips just brushing the windscreen). Sing as loudly as you will sing during your performance. You want to set the Trim to work at your maximum volume.
  • Instrument
Turn your input as high as it is likely to go during performance.


Trim Controls

The ToneMatch Mixer[2] trim controls for Channels 1-4 (1-8 for the T8S ToneMatch mixer) provide a significant gain increase when you reach the upper limit. This increase in gain is normal operation.

Most sources like typical microphones and piezo pickup systems can provide enough level without the need to add significant gain from the trim control. Certain sources like passive acoustic guitar pickups require additional gain and in these cases it can be necessary to set the trim level to the upper range of the control. When the trim control is set this high you may notice the gain change. This is normal operation. If you want to run the trim control at lower settings we recommend using a preamp or simple stomp box level booster.


The trim for Aux input channels 5/6 (9/10 for the T8S ToneMatch mixer) do not exhibit the same behavior as the trim controls for Channels 1-4 (1-8 for the T8S ToneMatch mixer). The Aux inputs are designed for line level sources and do not have the same gain staging as channels 5/6 (9/10 for the T8S ToneMatch mixer).


Details for the T1

Here's a quick video to help you set the input trim for a microphone on the T1 ToneMatch Audio Engine. This is called Gain Staging.

The trim controls across the top will be different
The trim controls across the top of your T1 ToneMatch Audio Engine will likely be different. This is because the output levels of your input sources will likely be different. This is normal.
Mixing - Use the volume controls not the trim controls
Once you have set the input trim, you should not have to change it until you change the input source (e.g. different microphone, singer, or instrument). Do not use the trim control to change the channel volume. Use the channel volume control.
Scenes
Saved Scenes do not capture the trim, channel volume, or Master Volume settings.

The same principles apply to an instrument or line-level input.

  • Set the source to the highest level you will need during the show
  • Set the input trim so that you get solid green, occasional yellow flickers, and never see red.

For more detailed steps for T1, T4S, and T8S, see Feedback / Microphone#Gain Staging.


Microphone Technique?

Use close‑microphone technique: lips barely brushing the windscreen. Every halving of distance gives roughly 6 dB more gain before feedback.


Close Microphone Technique details

Get close to the microphone when you want to be loud. No other technique has a big an impact on feedback. Each halving of distance is approximately another 6 dB of gain before feedback. This relationship in physics is known as the Inverse Square Law. This means that the difference between working a microphone at 2 inches, and 1/4 inch is 18 dB, which is more than twice as loud. While good mic technique often involves "working" the microphone at different distances, singers must be mindful of the fact that small changes in distance from the mouth result in very dramatic changes in sound level.

In the feedback diagram at the top, getting close to the microphone means getting more sound from voice which translates to more gain without feedback.


Charlie Ferrin at Bose: Nov. 9, 2007

For more, see Feedback / Microphone#Close Microphone Technique.


Do directional microphones help with feedback?

Yes. Supercardioid and hypercardioid microphones provide the best gain‑before‑feedback, followed by cardioid. Omnidirectional microphones provide the least.


Details about Directional Microphones

Principles

Use a directional microphone. Hypercardioid is better than cardioid, which is better than omnidirectional. All sound waves impinging on the microphone from a direction other than the intended signal is "noise" and will lower the threshold of feedback.

Directional microphones "collect" less sound from directions other than what they're supposed to amplify (the voice, or an instrument) and hence are less likely to feed back.

In addition, most directional microphones have a strong behavior called proximity effect. This is the strong buildup of bass and low-mid response as the source (say the voice) to microphone distance decreases. For microphones intended to sound natural when the voice is very close -- say one of a number of popular stage vocal microphones -- what this means is that low-to-middle frequencies from sources at a distance, including loudspeakers being used to amplify the voice, are largely rejected by the microphone. This is a real plus in terms of avoiding microphone feedback.

Conversely, an omnidirectional microphone (equal sensitivity to sound coming from any direction) has no proximity effect. This is an advantage, often in the studio where the engineer wants a consistent tone regardless of distance. But it's a disadvantage on stage in terms of feedback. An omnidirectional mic collects more sound that's not the target, and because it has no proximity effect, it is more susceptible to feedback at low-to-mid frequencies than a directional mic.


Omnidirectional and Unidirectional Microphones

There are two basic types of microphone — omnidirectional and unidirectional[3]

.

Omnidirectional Microphone

Omnidirectional mic. It is sensitive to sounds from all directions.

It's unlikely you will use an omnidirectional microphone in a live performance setting. You will pick up too much ambient noise from the room, the audience, and the loudspeakers (leading to feedback).
Use omnidirectional microphones when the sound source could be anywhere around the microphone. This picks up a lot of room ambiance, which sometimes is the goal. Direct and ambient sound can be adjusted by moving the microphone closer to or further from the sound source.


Unidirectional Microphone

Unidirectional microphones are sensitive to sound coming from only one direction. Examples:

  • a vocalist singing directly on axis directly into the microphone
  • a guitar amplifier with the microphone aimed directly at the speaker cone

All of the following types are unidirectional

Cardioid

The most common type of unidirectional microphone is called a “cardioid” because its pickup pattern is heart-shaped. It picks up most sound from the front of the microphone and some from the sides.

Although you will get better gain-before-feedback from a cardioid microphone than an omnidirectional microphone, you will get better gain-before-feedback from a supercardioid or hypercardioid microphone (see next section).

Examples of common cardioid microphones (good to great microphones but not necessarily the best for gain-before-feedback with Bose L1 systems)

  • Sennheiser e 835, e 935, MD 935
  • Shure SM 58, SM 57, Beta 87C
Supercardioid / Hypercardioid

Supercardioid or hypercardioid microphones offer even greater sound isolation through narrower pickup patterns.




Examples of common supercardioid/hypercardioid microphones

  • Audix OM 5, OM 3b, OM 6, OM 7, VX 5
  • EV N/D 767A
  • Neumann KMS 105
  • Sennheiser e 845, e 865, e 945, e 965, MD 441, MD 945,
  • Shure Beta 58A, Beta 87A

For examples and diagrams, see Feedback / Microphone#Directional Microphones.


How should I place monitors to avoid feedback?

If you are using stage monitors, be sure to place them so they are directing sound at the area of the microphone that rejects the most sound.

Note from Shure.com

Other variants on the unidirectional polar pattern include supercardioid and hypercardioid options. Both patterns offer narrower front pickup angles than the cardioid – 115 degrees for the supercardioid and 105 degrees for the hypercardioid – alongside greater rejection of ambient sound. Additionally, while the cardioid is least sensitive at the rear (180 degrees off-axis), the supercardioid is least sensitive at 125 degrees and the hypercardioid at 110 degrees. When placed properly they can provide more 'focused' pickup than the cardioid pattern, but they also have less rejection at the rear. If you're using either of these polar patterns on stage with wedge monitors, it's important make sure you avoid placing the wedges directly behind the mic in this instance. Instead, place them either side at the mics least sensitive angle.


How many open microphones can I use before feedback becomes a problem?

Every time you double the number of open microphones, you lose about 3 dB of gain before feedback. Use as few open mics as possible, and mute or gate unused ones.

See Feedback / Microphone#Open Microphones.


How should I use EQ to reduce feedback?

Use EQ sparingly. Avoid excessive high‑frequency boost, and use ParaEQ to notch out a problem frequencies if needed.

For step‑by‑step notching instructions, see Feedback / Microphone#Notch Out a Problem Frequency.


Do vocal effects increase feedback?

Yes. Turn off effects until you have stable gain, then add them back one at a time so you can hear their impact.

See Feedback / Microphone#Effects.


Do instrument pickups help reduce feedback?

Yes. Pickups provide much higher gain‑before‑feedback than microphones and avoid the distance/position issues of miking an instrument.

See Feedback / Microphone#Instrument Pickups.


Sub1/Sub2

Sub1 Sub2 This information is applicable to the Sub1/Sub2

Sub1/Sub2‎‎

Sub Comparison

S1 Pro with Sub1 or Sub2

Bose App / Music App / L1 Mix App

As of 2025 The current app for Bose Portable PA is the Bose App.

This applies to all L1 Pro and the S1 Pro+

Get it on the Google Play Store or the Apple App Store.


ToneMatch Mixers

T4S This information is applicable to the T4S ToneMatch® mixer
T8S This information is applicable to the T8S ToneMatch® mixer

Engineered with a powerful DSP engine and intuitive user control, the T4S/T8S ToneMatch mixers offer studio-quality EQ, dynamics and effects. Sound great with integrated BoseToneMatch processing and zEQ, especially when connected to a Bose L1 or F1 system for full end-to-end tonal control.

read more — T4S/T8S ToneMatch® Mixers

Other Bose Portable PA Products

L1 Legacy F1 S1 Pro

Earlier Products

Click or tap your product
click or tap your product

S1 L1 Compact T4S ToneMatch Mixer L1 Model 1S B1 Bass Module B1 Bass Module T8S ToneMatch Mixer T1 ToneMatch® Audio Engine A1 PackLite amplifier B2 Bass Module L1 Model II L1 Model I / Classic F1 Model 812 F1 Subwoofer Image Map

Product Articles

Frequently Asked Questions

Articles by Application

DJ Solo artist Duo Jam Session



New Articles

Legacy System Updates


Product Announcements

L1 Pro October 2020
S1 Pro system January 23, 2018
T4S/T8S ToneMatch® Mixers January 23, 2018
Bose Pro Portable PA Community site October 27th 2016
 
 

 

Firmware updates for Model II without T1®


Identify your L1®


Unofficial Guides & FAQs for Bose Professional Portable

This is the home of Unofficial [4] Guides for Bose F1 and L1 System Users and Performers.

Education



L1® Systems on Tour

Please follow the link and then view it full screen.



Getting Started

  • Click the links in the menu at the top left.
  • Try the search box (just type in a keyword that comes up in the forum and click Search). Terms to try (individual words) Gain Mixer Mono Phase Chris Cliff Hilmar (hint: you can double click a keyword and drag it into the search box. Then click Search).

<inputbox> 

type=search
parameter1=value
parameter2=value

</inputbox>

  • Try the Random page link (just keep clicking it for a fast trip around the wiki). After you try it once, you can use the link in the top left menu keep going.

On most pages, you will see category links across the bottom. You can try those too.


Vision

To help Musicians to deliver their music to their audiences with the grace and ease that comes of knowing their craft and their tools.

Mission

To share our collective and growing knowledge about the L1 technology so that we all spend less time thinking about the technology, and more time playing Music.

Goals

  • To change the perception of Live Music.
  • To make it possible for musicians to take their music and share it with their audiences, contributing recognizable value and being fairly compensated for what they contribute.

Related Reading

The Bose L1® Wiki Project - For background about the project

Wikipedia:Replies to Common Objections



Original Source adapted for this site below

Please note that all textual contents of MediaWiki.org, unless they're not exclusively marked as public domain, are released under the GNU Free Documentation License (GFDL).
See Project:Copyrights for more information.


Bose Portable PA Encyclopedia MAKES NO GUARANTEE OF VALIDITY

Bose Portable PA Encyclopedia at http://toonz.ca/bose/wiki/ is the online home of and an access point for information about the Bose Portable PA products (L1, F1, S1).

Information Sources

Most of the information here has been supplied by or reviewed by Bose Corporation. External links to technical and marketing data are direct to the Bose site wherever possible.

Editorials and personal opinions are clearly marked.

No contract; limited license

Please make sure that you understand that the information provided here is being provided freely, and that no kind of agreement or contract is created between you and the owners or users of this site, the owners of the servers upon which it is housed, the individual Bose Portable PA Encyclopedia contributors, any project administrators, sysops or anyone else who is in any way connected with this project or sister projects subject to your claims against them directly. You are being granted a limited license to copy anything from this site; it does not create or imply any contractual or extracontractual liability on the part of MediaWiki or any of its agents, members, organizers or other users.

There is no agreement or understanding between you and Bose Portable PA Encyclopedia regarding your use or modification of this information beyond the GNU Free Documentation License (GFDL); neither is anyone at Bose Portable PA Encyclopedia responsible should someone change, edit, modify or remove any information that you may post on Bose Portable PA Encyclopedia or any of its associated projects.

Trademarks

Any of the trademarks, service marks, collective marks, design rights, personality rights or similar rights that are mentioned, used or cited in the articles of MediaWiki.org are the property of their respective owners. Their use here does not imply that you may use them for any other purpose other than for the same or a similar informational use as contemplated by the original authors of these Bose Portable PA Encyclopedia articles under the GFDL licensing scheme. Unless otherwise stated Bose Portable PA Encyclopedia and Bose Portable PA Encyclopedia sites are neither endorsed nor affiliated with any of the holders of any such rights and as such Bose Portable PA Encyclopedia can not grant any rights to use any otherwise protected materials. Your use of any such or similar incorporeal property is at your own risk.

Jurisdiction and legality of content

Publication of information found on MediaWiki.org may be in violation of the laws of the country or jurisdiction from where you are viewing this information. The Bose Portable PA Encyclopedia database is stored on a server in the Province of British Columbia in Canada, and is maintained in reference to the protections afforded under local and federal law. Laws in your country or jurisdiction may not protect or allow the same kinds of speech or distribution. Bose Portable PA Encyclopedia does not encourage the violation of any laws; and cannot be responsible for any violations of such laws, should you link to this domain or use, reproduce, or republish the information contained herein.

Thank you for spending the time to read this page, and please enjoy your experience at Bose Portable PA Encyclopedia. span class="structuredData">

Overview of this site

This is the home of Unofficial FAQs Guides for Bose L1® Portable Systems Users and Performers. There are 956 articles for you all related to using and performing with the Bose L1® Portable Systems for Performers and Owners


Google+

       April 1 2009


Bose L1® Model II


URL
Release Date: 2007-03-29
Height: 84 inches
Weight: 84 pounds (includes B1)
Power Stand Depth:27.2 inches
Power Stand Width:26 inches
Description: FAQ, documentation, hints and tips for owners of the L1® Model II
Description:

Key Features

  • High-performing, powered, portable two-way loudspeaker system with a 195° H x 0° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction

  • 24-driver articulated line array loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area—even off to the extreme sides

  • Consistent front-to-back coverage, 24 drivers mounted in a vertical line array produce little drop in sound pressure level per doubling in distance than a conventional point source

  • Retractable folding leg mechanism for easy transport

  • Lightweight, interlocking components

  • Expandable bass design supports the use of multiple B1 bass modules or a single B2 bass module

  • Digital Ethercon port provides single-wire connectivity for the T1 ToneMatch audio engine

Physical

Enclosure
Power Stand: Polypropylene cover with cast aluminum legs and steel chassis base
Cylindrical Radiator: Aluminum enclosuure with ABS baffle

Dimensions
Assembled height: 84.0" (2134 mm)

Net Weight
Power Stand: 23.7 lb (10.7 kg)
Cylindrical Radiators (pair): 33.7 lb (15.3 kg)
B1 bass module: 26.6 lb (12.1 kg)
B2 bass module: 45 lb (20.41 kg)

Color
Black

Package Contents
1 system

In stock $ New 999.95
Google+


Bose L1® Model I


URL
Release Date: 2007-03-29
Height: 82.5 inches
Weight: 97 pounds (includes B1)
Power Stand Depth:26 inches
Power Stand Width:26 inches
Description: Bose Spatial Dispersion™ system technology delivers sound evenly across the stage and throughout the audience. The L1 Model I and L1 Model II systems project sound waves forward and to the sides at nearly 180 degrees and with little vertical dispersion, reducing unwanted room reverberation. Amplified sound is spread more evenly across the stage and into the audience. The volume level drops off much more slowly than with a conventional speaker.
Description: High-performing, powered, portable two-way loudspeaker system with a 160° H x 0° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction

  • Spatial Dispersion™ loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area—even off to the extreme sides

  • Consistent front-to-back coverage, 24 drivers mounted in a vertical line array design produce a loss of only 3 dB in sound pressure level per doubling in distance

  • Integrated ToneMatch® presets for popular vocal microphones and instruments

  • Integrated 4-channel mixer with wired remote control

  • Lightweight, interlocking components for easy transport

  • Expandable bass design supports the use of multiple B1 bass modules

    In stock $ New 999.95
    • Google+


    Bose L1® T1 ToneMatch® Audio Engine


    URL
    Release Date: 2007-03-29
    Height: inches
    Weight: 2.1 pounds
    dimensions 8.22" H x 6.52" W x 2.66" D (209 mm H x 165 mm W x 67 mm D)
    Power Stand Depth:n/a
    Power Stand Width:n/a
    Description: FAQ, documentation, hints and tips for owners of the T1 ToneMatch® Audio Engine
    Description: T1 ToneMatch® Audio Engine

    Features

    ToneMatch - Features
    Technical Specifications

    Audio Channels
    4

    Outputs
    2- Master and AUX

    A/D and D/A Converters
    24-bit

    Sample Rate
    48 kHz

    USB & Interfaces
    1.1 protocol, Type A to Type B cable

    Dimensions
    8.22" H x 6.52" W x 2.66" D (209 mm H x 165 mm W x 67 mm D)

    Shipping Weight
    2.1 lb (.97 kg)

    The T1 ToneMatch® audio engine is a digital multichannel mixer designed for use with Bose® L1® sound systems. It provides four independent channels, over 100 proprietary ToneMatch presets for instruments and microphones and a complete suite of studio-class effects and sound processors.

    Proprietary ToneMatch presets optimize L1 system to match the intended natural sound of specific instruments and vocal mics. Over 100 presets are organized into quick-access banks and can be independently assigned to each channel. Free ongoing updates can be downloaded via a USB connection between your computer and the ToneMatch audio engine.

    • More than 100 proprietary ToneMatch presets for a variety of popular microphones and instruments

    • Four input channels with independent selection of ToneMatch presets and effects

    • Proprietary zEQ for precise tone control, plus a complete suite of studio-class effects and processing, such as reverb, delay and modulation

    • Chromatic tuner

    • Phantom power

    • Compatible with any L1 system
      (requires T1 power supply for use with L1 Model 1 and L1 Compact systems, and with a PC)

    User interface

    ToneMatch - User Interface

    1. Input signal/clip LEDs (1-4/5) — Displays the input signal status in color: Green indicates the presence of an input signal, yellow indicates a signal near clipping and red indicates clipping

    2. Trim controls (1-4/5) — Adjust the input sensitivity for the respective channel

    3. Phantom power switch — Applies +48V power to input channels 1-3. A red LED indicates that phantom power is on

    4. Display — Provides function menus and system status information

    5. T1 rotary selector — Allows access to both global and channel related parameters, which are adjusted using the editing controls

    6. Editing controls — These three rotary/push-button controls allow you to select or adjust items/values appearing on the display

    7. CH edit buttons (1-4/5) — Select the channel you want to modify using the T1 rotary selector and display-related editing controls

    8. FX mute buttons (1-4/5) — Bypass the Mod, Delay and Reverb effects on the selected channel

    9. Volume controls (1-4/5) — Adjust the volume level for the respective channel

    10. Mute buttons (1-4/5) — Silence the audio output for the respective channel

    11. MASTER volume control — Adjusts the overall output level

    Inputs and Outputs

    ToneMatch - Inputs and outputs

    1. ToneMatch port — A digital output used by the L1 Model 1S and Model II systems. Also delivers power to the T1 audio engine from the L1 Model 1S and Model II power stands. Accepts the included ToneMatch cable

    2. Power switch — Turns the T1 audio engine on or off

    3. IN — Analog input channels 1-3. Accepts XLR balanced cables for microphones, or ¼" TRS balanced or TS unbalanced cables for high-impedance inputs such as guitars

    4. USB port — A USB interface that allows you to connect the T1 to your computer. This feature enables you to stream audio to/from your computer, update the T1 and back up performance scenes

    5. Preamp OUT — Preamp outputs for channels 1-3. Accepts ¼" TRS balanced or TS unbalanced cables

    6. Master output — User-definable analog output. Can be configured for a pre- or post-master volume analog output. Accepts ¼" TRS balanced or TS unbalanced cables

    7. Aux output — User-definable analog output. Can be configured for a pre-fader, post-EQ, and effects or post fader output. Accepts ¼" TRS balanced or TS unbalanced cables

    8. Line IN — Analog input channels 4/5. Accepts ¼" TRS balanced or TS unbalanced cables for line-level inputs. Can be used for stereo input signals

    In stock $ New 999.95
    Google+


    Bose L1® Compact


    URL
    Release Date: 2012-09-27
    Height: 78.5 inches
    Weight: 29.2 pounds
    Power Stand Depth:16.8 inches
    Power Stand Width:13.2 inches
    Description: FAQ, documentation, hints and tips for owners of the L1® Comppact
    Description:

    Key Features

    • High-performing, powered, portable two-way loudspeaker system with a 180° H x 40° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction

    • Articulated line array loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area—even off to the extreme sides

    • Curved array design provides 40° of vertical coverage

    • Integrated ToneMatch® presets contain hardwired equalization curves for dynamic handheld microphones and acoustic guitars

    • Lightweight, interlocking components for easy transport

    • Offers both collapsed and extended setup positions

    Physical

    Enclosure
    Power Stand: Polypropylene
    Extensions and Array: ABS

    Dimensions
    Assembled height, collapsed position: 16.5" (418 mm)
    Assembled height, extended position: 78.5" (1995 mm)

    Net Weight
    Power Stand: 24.6 lb (11.2 kg)
    Extensions (each): 2.3 lb (1.1 kg)

    Color
    Black

    Package Contents
    1 system

    In stock $ New 999.95
    Google+


    Bose L1® B2 Bass Module


    URL
    Release Date: 2012-09-27
    Height: 23.4 inches
    Weight: 45 pounds
    dimensions 23.4H x 13.31W x 18.9D (59.4 cm x 33.8 cm x 48 cm)
    Power Stand Depth:18.9 inches
    Power Stand Width:13.31 inches
    Description: FAQ, documentation, hints and tips for owners of the Bose B2 Bass Module
    Description:
    • High-performance flexible bass module
    • Designed to provide deep, impactful bass for higher SPL live music and DJ applications
    • Features two 10" high-excursion woofers mounted in a rugged enclosure
    • Features a three-position sensing switch, allowing bass output to be adjusted for different applications
    • Interlocking end caps allow up to two B2 modules to be stacked together
    • Includes a slip cover and NL4 cable

    [edit] Electrical Specifications

    • Impedance: 4 ohms
    • When used with Model 1S or Model II
      • Frequency Response (+/-3 dB) 40Hz - 200 Hz
      • Frequency Range (-10 dB) 32 Hz - 200 Hz


    • When used with Model / Classic
      • Frequency Response (+/-3 dB) 40 Hz - 180 Hz
      • Frequency Range (-10 dB) 32 Hz - 180 Hz

    [edit] Mechanical Specifications

    Dimensions: 23.4H x 13.31W x 18.9D (59.4 cm x 33.8 cm x 48 cm)

    Weight: 45 lb (20.41 kg)


    Image:B2Mechanical.png

    In stock $ New 999.95
    Google+

    1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 L1 Pro 8, L1 Pro 16, L1 Pro 32
    2. ↑ T4S ToneMatch mixer or T8S ToneMatch mixer or T1 ToneMatch Audio Engine
    3. ↑ Microphone Techniques - Shure Notes
    4. ↑ This site is privately owned, supported by volunteer efforts of owners of the F1 and Bose® Personalized Amplification System™ family of products of products. Please see About Bose Portable PA Encyclopedia for more information.

    Retrieved from "https://toonz.ca/bose/wiki/index.php?title=The_Bose_Professional_Portable_PA_Encyclopedia&oldid=22682"