Amazon Echo to S1 Pro

From Bose Portable PA Encyclopedia
Revision as of 12:20, 12 December 2019 by ST (talk | contribs)
Jump to: navigation, search

To connect your Amazon Alex device to your S1 Pro

Put your S1 Pro System in Pairing Mode

Press and hold the Bluetooth button for about 3 seconds until the Bluetooth indicator begins flashing white. The Bluetooth button is located in the Input 3 section on the system's control panel

S1 Pro Channel 3.jpg


Connect Your Echo Device to Bluetooth Speakers

You can stream audio from an Echo device through a Bluetooth speaker.

Before you begin

  • Set your Echo and Bluetooth speaker at least three ft (one m) apart.
  • For best results, choose a Bluetooth speaker certified for use with Echo devices. To learn more, go to Supported Bluetooth Profiles for Echo Devices.
  • Turn on your Bluetooth speaker and turn up the volume.
  • Disconnect other Bluetooth devices from your Echo. An Echo can only connect to one Bluetooth device at a time.

To connect a Bluetooth speaker to your Echo

  • Turn on pairing mode on your S1 Pro System.
    • Press and hold the Bluetooth button for about 3 seconds until the Bluetooth indicator begins flashing white. The Bluetooth button is located in the Input 3 section on the system's control panel
  • In the Alexa app, select the Devices icon.
  • Choose your device.
  • Select Bluetooth Devices.
  • Select Pair a New Device.
  • When a list of available devices appears, select your Bluetooth speaker and follow the instructions on the screen.
  • When the device pairs successfully, the Bluetooth button will turn solid white.

Tip: To connect to a previously paired device, say, "Connect." Your Echo connects to the device that was last connected.

Adapted from Connect Your Echo Device to Bluetooth Speakers]