Difference between revisions of "B1 Bass Module"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (== Classic Extended Bass Package ==)
(New B1 vs Old B1)
Line 72: Line 72:
  
 
In der Regel wird auf Anfrage aber auch jedes lokale Musikgeschäft ein Speakon NL4-Kabel in passender Länge herstellen können.
 
In der Regel wird auf Anfrage aber auch jedes lokale Musikgeschäft ein Speakon NL4-Kabel in passender Länge herstellen können.
 +
 +
 +
== B1 New/Old ==
 +
On March 29th 2007 {{Bose}} announced the [[Model II]] and the [[T1]]. At the same they change the specifications for the [[B1]] showing the weight as 25.1 pounds (previously 28 pounds).
 +
 +
Apparently the updated version started shipping in May 2007 but there may still be older inventory in the supply chain.
 +
 +
=== Ordering ===
 +
The part numbers and descriptions of the revised B1 are the same as the original. Here is how you can tell the difference.
 +
 +
:If you call Guitar Center (GC) you can identify which B1 they have over the phone (if they can go look at the carton in back.)
 +
 +
:The older B1 says on the outside of the box 'Personalized Amplification System, Bass Module B1'. The box is also bigger, measuring 23"x15"x19"(LWH).
 +
 +
:The new style B1 says "L1 System, Bass Module B1" on the carton. The carton is also smaller, measuring 21.5"x13.5"x17"(LWH).
 +
 +
:There is no way to identify which B1 is which without physically looking at the box. The product # is the same
 +
 +
-- MikeZ-at-Bose<ref>MikeZ-at-Bose talks about identifying B1s (old/new) [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=5341014384&r=3821046384#3821046384 New B1 vs. Old]</ref>
 +
=== Pictures ===
 +
 +
==== B1 New ====
 +
[[Image:B1NewFar.jpg|Image courtesy of Tom Munch]]
 +
 +
[[Image:B1NewClose.jpg|Image courtesy of Tom Munch]]
 +
 +
==== B1 "Classic" ====
 +
[[Image:B1OldFar.jpg|Image courtesy of Tom Munch]]
 +
 +
[[Image:B1OldClose.jpg|Image courtesy of Tom Munch]]
 +
  
  

Revision as of 09:54, 10 August 2007

B1Bass.gif

Keep the B1s Together

If you have more than one B1 playing the same sound source (instrument), keep the B1s together. You should get as much as 3 dB more than if you have them separated. This is due to acoustic coupling. This also avoids creating nulls. You can stack them or have them side-by-side but you want to keep them together. For more comprehensive discussion about this see Arranging and Placing the B1s (below).

Arranging and Placing the B1s

Chris-at-Bose talks about how and where to locate your B1s

Stacking (up to four high)

From page 12 of the Owners Guide

B1Stack4.png

Rotate the Logos

You can rotate the Bose logo so it is parallel to the floor even if you have turned the B1 on its side. Chuck-at-Bose said, "... Maybe it's my kung fu grip, but I've had good luck with carefully pinching the logo and pulling at these points, then rotating 90 degrees:"

B1LogoRotate.jpg

Be very careful with the fine ends of the logo because they can be easily broken off. You may even try to pull up in the middle with your fingernails on the edge instead of near the ends.

Pull the logo straight out about ½ inch before you attempt to turn it. It is spring loaded, and the rear post is square. You have to clear the post (about ½ inch before you can turn it).

How Low does the B1 Go?

The short answer: 40 Hz. But what about instruments that go lower than that, for example a five string Bass. A much better answer comes from Hilmar-at-Bose in Bass Frequencies


Port Orientation

"Theoretically, port-side-up may give a tiny bit better aligned floor reflection but in practice, the difference is so small that it isn't worth bothering with. However, I would still advise when you stack multiple B1s keep them all in the same orientation." - Hilmar-at-Bose [1]

When I read this, I had to go and look very closely to find the port. It's easier to figure out that when the B1 is on it's side, port side up is same as (on the back) connection panel down.


Check the Cables

B1 Cable

You may want to double check your Blue B1 cables.


B1/B2 Cable - Connections

From Kyle-at-Bose [2]

We've seen some past B1 cable quality problems which, because of input from folks like you, we've since resolved.

I'm fairly confident that the connector and wires in the cable assembly are OK. The problems we were having were related to the actual connection of the wire leads to the Speakon connector. Problems would be obvious in one case- the bass module cuts out. The second case would not be so obvious- the EQ to the B1 and L1 would be wrong and would make the system perform and sound poor.

So, if you have a moment and a screwdriver, we can fix these cables together.

Remove the rear shell of the connector by unscrewing it. (See the pic below, not the exact connector but similar). We use a 4-wire connection so what you need to do is re-attach, possibly restripping first (need to use a wire stripper), the wire to the connector terminals. There are four terminals +1, -1, +2, -2. Each wire needs to be appropriately connected to the same terminal on each end of the cable. Luckily, no soldering is needed. These Speakon connectors have screw terminals. All you need to do is unscrew the terminal using a screwdriver, reinsert the bare wire, and then tighten the terminal.

SpeakonExplodedNL4.gif

B1/B2 Conductors Broken

From Harry (dancingdogmuse)[3]

The initial symptoms were clicking followed by silence. It turned out to be a problem with broken wires inside the blue jacket of the B1 cable.


Bose B1 cableDamage1.JPG


Bose B1 cableDamage2.JPG



Longer cables for B1s

Unfortunately, the Speakon connector comes in three different flavors, NL2 (2-pins), NL4 (4 pins), and NL8 (8-pins). Most salespeople are not aware of the differences. The Bose B1 requires a NL4 connector with all 4 pins connected (that's why we call it 4-wire cable).

A good source for these cables is

http://www.audiopile.net

for example

http://www.audiopile.net/products/Speaker_Cables/NL-4_speaker_cable/NL413_cutsheet.htm

If you call Mark and tell him you want the cable for the Bose B1, you will get on that is made to our specifications. You can also any custom length cable at a very reasonable price.

Hilmar-at-Bose[4]


German

German (translation provided by BlackForestMan)

SPEAKON Kabel gibt es in 3 verschiedenen Varianten, NL2 (2-polig), NL4 (4-polig), and NL8 (8-polig). Häufig kennt das Verkaufspersonal diese Unterschiede nicht. Das Bose B1 Bassmodul benötigt aber ein NL4 bei dem alle 4 Anschlüsse verbunden sind (daher sprechen wir hier auch von einem 4-adrigen Kabel).

Fertige Kabel in verschiedenen Längen gibt es z.B. hier:

dto. gibt es auch in 5m, 10m, 15m Länge usw.

In der Regel wird auf Anfrage aber auch jedes lokale Musikgeschäft ein Speakon NL4-Kabel in passender Länge herstellen können.


B1 New/Old

On March 29th 2007 Bose® announced the Model II and the T1. At the same they change the specifications for the B1 showing the weight as 25.1 pounds (previously 28 pounds).

Apparently the updated version started shipping in May 2007 but there may still be older inventory in the supply chain.

Ordering

The part numbers and descriptions of the revised B1 are the same as the original. Here is how you can tell the difference.

If you call Guitar Center (GC) you can identify which B1 they have over the phone (if they can go look at the carton in back.)
The older B1 says on the outside of the box 'Personalized Amplification System, Bass Module B1'. The box is also bigger, measuring 23"x15"x19"(LWH).
The new style B1 says "L1 System, Bass Module B1" on the carton. The carton is also smaller, measuring 21.5"x13.5"x17"(LWH).
There is no way to identify which B1 is which without physically looking at the box. The product # is the same

-- MikeZ-at-Bose[5]

Pictures

B1 New

Image courtesy of Tom Munch

Image courtesy of Tom Munch

B1 "Classic"

Image courtesy of Tom Munch

Image courtesy of Tom Munch


Classic Extended Bass Package

In 2003 when the Bose® Personalized Amplification System™ family of products launched, the Extended Bass Package was a "Classic" Powerstand with 6 B1 Bass Modules. That was discontinued.

In fall 2005, the PackLite® power amplifier model A1 Extended Bass Package (A1 + two B1 Bass Modules) was introduced.

This is a look back at how we connected the Classic Extended Bass Package.


See Classic Extended Bass Package for more details.