Difference between revisions of "Bose S1 Pro Compared to Bose L1® Compact"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 119: Line 119:
 
<td>Power to speakers
 
<td>Power to speakers
 
</td>
 
</td>
<td>80 Watts
+
<td>tba Watts
 
</td>
 
</td>
 
<td>130 Watts
 
<td>130 Watts

Revision as of 21:05, 3 February 2018


FeatureBose S1 ProBose L1® Compact
S1 Pro Tilt-Back.jpg height:280px
Horizontal dispersion 100 degrees 180 degrees
Vertical dispersion 40 degrees 40 degrees
Output 103 dB / 109 dB peak 106 dB / 112 dB peak
Articulated Array® (speaker array) Three 2.00" (51 mm) high-excursion drivers mounted in a curved Articulated Array® loudspeaker Six 2.00" (51 mm)high-excursion drivers mounted in a curved Articulated Array® loudspeaker
Woofer One 6" (152 mm) low-frequency driver mounted behind the Articulated Array® loudspeaker One 8" (203 mm) low-frequency driver mounted in a ported bass enclosure in the power stand
Frequency Response
  • 70 Hz – 16 kHz +/- 3dB
  • 65 Hz – 14 kHz +/- 3dB
  • 50 Hz - 16 Hz (-10 dB)
Power to speakers tba Watts 130 Watts
Weight
  • 6.5 kg (14.3 lbs) – Without Battery
  • 7.0 kg (15.5 lbs) – With Battery
Total system weight 13.4 kg (30.2 lb)
  • Power Stand: 11.2 kg (24.6 lb)
  • Extensions (each): 1.1 kg (2.3 lb)
Multiple orientations
  • Elevated Surface
    Position the S1 Pro on a surface. This projects sound clearly and evenly throughout the audience, and ensures that audience members enjoy the full frequency range of the system.
  • Tilt-Back
    For performances where your audience is close to you, tilt the S1 Pro onto its back edge. For best results, the performer should stand or sit to one side of the loudspeaker to avoid blocking sound from the audience.
  • Monitor
    To use the S1 Pro as a personal floor monitor, place it on the ground horizontally, in front of and pointing toward the performer. Tilt the loudspeaker onto its side edge.
  • Speaker Stand
    Place one or two S1 Pro systems on speaker stands (sold separately) for general-purpose sound reinforcement. Monitor
  • Table Top (no extensions)
  • Floor with both extensions
    (no speaker stand required)
  • Floor with one extensions
Bluetooth input Yes: Channel 3 No
Reverb Yes No
ToneMatch® Presets Channel 1
  • Vocal Microphone
  • Acoustic
  • Line Level

Channel 2

  • Vocal Microphone
  • Acoustic
  • Line Level
Channel 1
  • Fixed: Microphone

Channel 2

  • Acoustic Guitar
  • Line Level
Battery Yes internal (optional) No
Connections

Channel 1:
XLR / 6 mm (1/4" Tip-Ring or Tip-Ring-Sleeve) balanced / unbalanced

Channel 2:
XLR / 6 mm (1/4" Tip-Ring or Tip-Ring-Sleeve) balanced / unbalanced

Channel 3:
3 mm (1/8" Tip-Ring-Sleeve) accepts stereo or mono input

Channel 1:
XLR balanced / unbalanced

Channel 2:

  • 6 mm (1/4" Tip-Ring or Tip-Ring-Sleeve) balanced / unbalanced
  • 3 mm (1/8" Tip-Ring-Sleeve) accepts stereo or mono input
  • Two RCA unbalanced phone plug
Crossover Frequency 600 Hz 400 Hz 4th order Butterworth