Difference between revisions of "Mixer / Behringer / UB1002FX"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m ({{Classic icon}}{{Model I icon}})
m (Mixer/Behring/UB1002FX moved to Mixer / Behring / UB1002FX: naming convention)
(No difference)

Revision as of 02:50, 21 December 2008

Classic This information is applicable to the L1® Classic
L1 Model I This information is applicable to the L1 Model I

Behringer UBX 1002FX Mixer

Summary

Use unbalanced ¼ inch Tip-Sleeve phone jack cables from the Mixer to the PS1 Power Stand (Classic) / Model I.

BehringerUB1202FXOutput.png

Use the ¼ inch phone jack (Tip-Sleeve) outputs to

The main outputs from this mixer are unbalanced ¼ inch Tip-Sleeve phone jacks that you can run to the Channel 1 or 2 ¼ inch Tip-Sleeve inputs.


Outputs

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

Tip-Ring-Sleeve to Tip-Ring-Sleeve

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.


Links:


Note: the UB1002FX and UB1202FX share the same manual.

BehringerUB1002-UB1202FX.png