Securing the T1® to the Microphone Stand Bracket

From Bose Portable PA Encyclopedia
Revision as of 13:06, 18 February 2013 by ST (talk | contribs)
Jump to: navigation, search

This is how I secure the T1® to the T1® Microphone Stand Bracket


  1. There is a velcro strap on the black ToneMatch cable.
  2. I use the velcro to secure the ToneMatch cable to the microphone stand just above the Microphone Stand Adapter (the thing that clamps around the mic stand).
  3. Then I insert the ToneMatch cable into the T1®. It locks into place.
  4. At this point, most people would put the T1® on the bracket and attach the other cables.
  5. I insert all the other cables into the T1® before I put it on the bracket. I do it this way because I have all my cables strapped to the microphone stand (I don't take them off between gigs). So there's no hanging stress from those either.
  6. Finally, I set the T1® on top of the bracket.

T1 Strapped 01.png


T1 Strapped 02.png


source

source: http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/1640046046?r=5190039046#5190039046

source