T1 ToneMatch® Audio Engine / Bypass

From Bose Portable PA Encyclopedia
Jump to: navigation, search

T1 This information is applicable to the T1 ToneMatch® audio engine
T4S This information is applicable to the T4S ToneMatch® mixer
T8S This information is applicable to the T8S ToneMatch® mixer

Introduction to Bypass

This applies to all ToneMatch mixers.

Hi Folks,

At the recent L1 users conference in Colorado, we found out that a high percentage of T1 owners did not know about the BYPASS feature that's employed in many places in the T1.

The BYPASS feature is extremely useful in deciding if a particular adjustment is giving you the sound you want. It's a form of an A/B switch.

For example, if you want to hear how a particular ToneMatch preset sound on and off, you would use bypass. If you wanted to hear how a particular reverb sounded you could turn it on and off, on and off. And so on. Most effects have this valuable feature.

As an example, here's the screen after you've chosen a Tonematch preset for Channel 1. In this case, I've chosen the preset for an Audix OM5.

Tutorial

T1Bypass01.png

To go into bypass mode, just click on the rotary-push knob below the word "category" on the screen.

T1Bypass02.png

Here's what the screen looks like after you push the button.

T1Bypass03.png

Quick Tutorial on Highly Useful BYPASS Feature... - Ken-at-Bose

T1Bypass04.png

What Happens When You Bypass a Preset?

What happens when you select a channel ‘Bypass’ button on the T1® audio engine?
Pressing the ‘Bypass’ button on a channel will change it’s current ToneMatch® preset to the generic “Utility Flat” preset. This enables you to audition between specific ToneMatch® presets and the ‘Utility Flat’ setting, helping you decide which preset you will ultimately choose.
In contrast, the key frequency adjustments for zEQ do not change when the ToneMatch® preset is ‘Bypassed’. For instance say that you originally had a ‘Kick Drum’ preset selected and then pressed ‘Bypass’, the key zEQ adjustment points would still remain focused on fine tuning a kick drum.


Source: Neil-at-Bose

Bypass Reverb

T1 This information is applicable to the T1 ToneMatch® audio engine

To bypass a zEQ setting on your T1®

T1zEQBypass.png


Use this to compare the sound with and without a zEQ setting to really hear what the zEQ is doing to the sound in the room.


Bypass zEQ

T1 This information is applicable to the T1 ToneMatch® audio engine

To bypass a zEQ setting on your T1®

T1zEQBypass.png


Use this to compare the sound with and without a zEQ setting to really hear what the zEQ is doing to the sound in the room.