T1 ToneMatch® Audio Engine Firmware Updates

From Bose Portable PA Encyclopedia
Revision as of 17:47, 30 September 2008 by ST (talk | contribs) (Version 1.7 notes from Neil - update later - replace html)
Jump to: navigation, search
Download.jpg

L1® Updater Software

Get the L1® Updater Software


These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software


macOS Issues

[Filename] can't be opened because the identity of the developer cannot be confirmed

If you see "[Filename] can't be opened because the identity of the developer cannot be confirmed" message displayed

Mac OSX users may see this message when trying to install a Bose app. If this message appears, try the following:

Mac users may need to hold the Control key (Ctrl) when opening the file.

Various versions of the Mac OS cannot identify Bose as a developer. The Mountain Lion version of OS X (10.8) includes a feature called Gatekeeper to protect users from installing applications of non-Apple identified developers. The Mavericks version of OS X (10.9.5) temporarily cannot identify Bose as a developer as well.

To open the application, follow these steps:

  • Press and hold the Control key while clicking on the application icon
    • Note: Do not use Launchpad to do this. Launchpad doesn’t allow you to access the shortcut menu

In the menu that appears, select Open at the top of the list

A confirmation window will appear. Select Open

Without Control click:

SoundTouch-osx-installer 01.png


With Control click:

SoundTouch-osx-installer 02.png

More information on Gatekeeper can be found at http://support.apple.com/kb/HT5290






Warning

If your firmware update is not successful - Caution

After you update the T1 ToneMatch Audio Engine or L1 Model II firmware, if you see a window on the PC that says the update was not successful, you should:

  1. turn the L1 and T1 off
  2. wait three seconds
  3. then turn the L1 and T1 back on

Do this before trying the update again!

This allows the L1 and T1s to re-establish a good copy of the software.

Source: If your firmware update is not successful - Caution


Version 1.7

Non Critical Update Available – T1® firmware version 1.7

As of July 1st 2008 T1® Audio Engines are now manufactured with DSP Firmware version 1.7. As a point of reference T1’s bearing a serial number of 042826z81830004AC or greater will include DSP Firmware version 1.7.

Although T1’s that contain Firmware 1.7 have already started shipping to customers, please be aware that there are still a large amount of T1’s with older firmware versions that will continue to ship.

Fixes
Updating to Firmware version 1.7 eliminates a popping noise that some T1’s produced when connected digitally to the L1® Model II Power Stand. The popping noise would only be audible when the T1’s power switch was turned on or off.

Note: If you are not currently experiencing this specific issue then there is no need to perform the update.

Download
Click here to download Firmware version 1.7.
Click here to download the L1® Updater software required to perform the update.

Note: We are also in the process of making this file available for download on www.Bose.com in the following weeks.

Version 1.6

Download T1® Firmware v 1.6

Note: This is a .BOS file and does not need to be decompressed as is stated in the 'Using BOS Files' section of the L1® Updater Software documentation. You cannot open this file directly. You must run the

These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software


macOS Issues

[Filename] can't be opened because the identity of the developer cannot be confirmed

If you see "[Filename] can't be opened because the identity of the developer cannot be confirmed" message displayed

Mac OSX users may see this message when trying to install a Bose app. If this message appears, try the following:

Mac users may need to hold the Control key (Ctrl) when opening the file.

Various versions of the Mac OS cannot identify Bose as a developer. The Mountain Lion version of OS X (10.8) includes a feature called Gatekeeper to protect users from installing applications of non-Apple identified developers. The Mavericks version of OS X (10.9.5) temporarily cannot identify Bose as a developer as well.

To open the application, follow these steps:

  • Press and hold the Control key while clicking on the application icon
    • Note: Do not use Launchpad to do this. Launchpad doesn’t allow you to access the shortcut menu

In the menu that appears, select Open at the top of the list

A confirmation window will appear. Select Open

Without Control click:

SoundTouch-osx-installer 01.png


With Control click:

SoundTouch-osx-installer 02.png

More information on Gatekeeper can be found at http://support.apple.com/kb/HT5290





and use that to open this file.
Date 2008/02/27
ReplacesT1 ToneMatch® Audio Engine Firmware Version 1.3
Recommended forAll T1 ToneMatch Audio Engine owners
System Requirements:


These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software


macOS Issues

[Filename] can't be opened because the identity of the developer cannot be confirmed

If you see "[Filename] can't be opened because the identity of the developer cannot be confirmed" message displayed

Mac OSX users may see this message when trying to install a Bose app. If this message appears, try the following:

Mac users may need to hold the Control key (Ctrl) when opening the file.

Various versions of the Mac OS cannot identify Bose as a developer. The Mountain Lion version of OS X (10.8) includes a feature called Gatekeeper to protect users from installing applications of non-Apple identified developers. The Mavericks version of OS X (10.9.5) temporarily cannot identify Bose as a developer as well.

To open the application, follow these steps:

  • Press and hold the Control key while clicking on the application icon
    • Note: Do not use Launchpad to do this. Launchpad doesn’t allow you to access the shortcut menu

In the menu that appears, select Open at the top of the list

A confirmation window will appear. Select Open

Without Control click:

SoundTouch-osx-installer 01.png


With Control click:

SoundTouch-osx-installer 02.png

More information on Gatekeeper can be found at http://support.apple.com/kb/HT5290





  • PC
    • Microsoft Windows 98 or higher
    • USB 1.1 or higher
  • Mac
    • Mac OS X version 10.3 or higher
    • USB 2.0
Related

L1® Model II Power Stand Firmware Updates Version 1.3 - Strongly Recommended

  • Note: this is Model II Power Stand firmware
AnnouncementNew T1 Firmware v 1.6 Release

Fixes

Blue Screen Outage

We’ve identified and fixed a problem in the Tuner which contributed to the small number of audio drop outs or “Blue Screen Issues” some of you may have experienced. Thank you to everyone that helped us identify this issue, we appreciate your patience and support.

Firmware update architecture

The T1 or model II power stand will now ignore the double update request. Enhancements have also been made to the L1® updater v. 1.1 for PC and L1® updater v. 1.0 for Mac that prevents the user from being prompted to retry the update. A message will now appear asking the customer to power cycle their T1 before attempting the update again.

L1® Updater Software application 1.1 for PC or L1® Updater Software application for 1.0 for Mac

Enhancements

Windows Vista Compatibility

The T1 ToneMatch Audio Engine can now be detected as an audio device when connected via USB to a PC that is using the Windows Vista operating system. This provides users the ability to use the T1® as an input device/soundcard with their favorite audio recording program.

Para EQ Range

The Para EQ range has been increased from 8k to 16k to provide more flexibility for more demanding applications. As an added convenience the name of the musical note associated with the frequency now appears on the display of the T1 ToneMatch Audio Engine.

USB audio metering and streaming

USB audio is now reflected in the channel 4/5 input metering under the Preferences menu only. The Trim LED for channel 4/5 will no longer track USB input levels.

USB AUX Tap addition

USB is now available on channel 4/5 dry AUX tap.


Prior Versions

  • Version 1.0 - Original as released from manufacturing (no download)
  • Version 1.1 - Internal release (no download)
  • Version 1.2 - Internal Release (no download)
  • Version 1.3 - Public Release (no longer required if you install 1.6) Notes below.
  • Version 1.4 - Internal Release (no download)
  • Version 1.5 - Internal Release (no download)


Version 1.3

This is not required if you install T1 ToneMatch® Audio Engine Firmware Version 1.6 above

Download T1® Firmware v 1.3

Date: 2007/08/10

Recommended for: All T1 ToneMatch Audio Engine Owners

Announcement: New T1® and L1® Firmware

Fixes

Lost Audio / Blue Screen

Fixes a bug where some power outages could cause the T1 to hang. This is related to the problems reported on the message board where some users have experienced a loss of audio sometimes accompanied by a blank blue LCD screen.[1]

Scene Names

Fixes a bug related to scene naming where scene names over 17 characters would display incorrectly.

Enhancements

Parametric EQ

We've also made a small enhancement to the Parametric EQ by including the note name which relates to the current frequency.


Related

It is highly recommended that you also download and apply L1® Model II Power Stand Firmware Updates Version 1.1

Prior Versions

  • Version 1.0 - Original as released from manufacturing (no download)
  • Version 1.1 - Internal release (no download)
  • Version 1.2 - Internal Release (no download)



  1. Message Board reports of T1™ failures