T4S USB Recording Levels Low

From Bose Portable PA Encyclopedia
Revision as of 15:50, 23 January 2019 by ST (talk | contribs) (Created page with "; When I am recording using the T4S/T8S USB-B output to my computer, the levels are too low. Set the channel trim controls so your inputs are just flickering red. Then push t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
When I am recording using the T4S/T8S USB-B output to my computer, the levels are too low.

Set the channel trim controls so your inputs are just flickering red. Then push the channel volume controls up well beyond 12:00 o'clock.

You can turn the Master way down - this won't affect the USB signal. You can turn it off if you don't need live monitoring.

You can monitor the USB output levels:

  • Turn the Rotary Selector to Prefs
  • Turn the Menu selection to Output Level
  • Watch the USB Output levels. You want them bouncing well to the right.

[Related discussion in the Bose Portable PA Community