Difference between revisions of "T8S to L1 Compact"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(Created page with "{{Compact icon}} {{T8S icon}} <p>Here's a quick overview of how you can connect a {{T8S}} to an {{Compact}}</p> *Leave the {{T8S}} and {{Compact}} turned off until you have...")
 
m
Line 1: Line 1:
 
{{Compact icon}} {{T8S icon}}
 
{{Compact icon}} {{T8S icon}}
 +
<div class="tocdiv">
 +
    <div>__TOC__</div>
 +
    <div><h2>Introduction</h2>
 +
Here's a quick overview of how you can connect a {{T8S}} to an {{Compact}}     
 +
    </div>
 +
</div> 
 +
  
 
+
=== Connections ===
<p>Here's a quick overview of how you can connect a {{T8S}} to an {{Compact}}</p>
 
  
 
*Leave the {{T8S}} and {{Compact}} turned off until you have things connected
 
*Leave the {{T8S}} and {{Compact}} turned off until you have things connected
Line 12: Line 18:
 
[[File:14trstotrs.jpg|200px]]
 
[[File:14trstotrs.jpg|200px]]
  
 +
=== Settings ===
 
On the {{Compact}}:
 
On the {{Compact}}:
 
*Set the channel volume off for channel 1
 
*Set the channel volume off for channel 1
Line 25: Line 32:
 
*Bring up the channel volume on the {{Compact}} to the '''center''' position
 
*Bring up the channel volume on the {{Compact}} to the '''center''' position
  
Control the overall volume with the T4S master volume. <br />If you see the {{Compact}} clipping (red light) or you hear audible distortion, turn down the volume on channel 2.  
+
Control the overall volume with the {{T8S}} master volume.  
 +
 
 +
If you see the {{Compact}} clipping (red light) or you hear audible distortion, turn down the volume on channel 2.  
  
 
If you have questions, please join the conversation in the [https://www.bosepro.community/g/portable/topic/can-the-compact-connect-to-a-t4s-at-all Bose Portable PA Community].
 
If you have questions, please join the conversation in the [https://www.bosepro.community/g/portable/topic/can-the-compact-connect-to-a-t4s-at-all Bose Portable PA Community].

Revision as of 12:19, 23 May 2019

L1 Compact
T8S This information is applicable to the T8S ToneMatch® mixer

Introduction

Here's a quick overview of how you can connect a T8S ToneMatch mixer to an L1 Compact


Connections


T1 ToneMatch® Audio Engine power supply

Use a 1/4 inch Tip-Ring-Sleeve cable for best results

14trstotrs.jpg

Settings

On the L1 Compact:

  • Set the channel volume off for channel 1
  • Set the channel volume off for channel 2
  • Turn on the T8S ToneMatch mixer
  • Set the Rotary Selector to PAN/AUX
  • Press the CH EDIT button for each channel you are using and pan the input hard RIGHT
  • Note: Steps 1 and 2 above are one-time-only. You don't have to change this unless you get another L1 Compact and want to run in stereo

Control the overall volume with the T8S ToneMatch mixer master volume.

If you see the L1 Compact clipping (red light) or you hear audible distortion, turn down the volume on channel 2.

If you have questions, please join the conversation in the Bose Portable PA Community.