View source for T4S/T8S ToneMatch® Mixer Firmware Updates

<noinclude>__NOEDITSECTION__
[[Image:Download.jpg|right]]
<table><tr>
<td valign="top" width="250">__TOC__</td>
<td valign="top">
== L1® Updater Software ==
{{T4S/T8S Firmware Prerequisites}}

</td>
</tr></table> 
</noinclude> 

<html>

<iframe width="560" height="315" src="https://www.youtube.com/embed/ILWi5bhXJpQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
<br>
</html>

<big> ''' {{T4S/T8S firmware version}} ''' </big>

For best results, please download and extract all files mentioned below to the same folder on your computer. This will make it easier to do the updates.

{{T4S/T8S firmware version}}

These instructions describe how to update the firmware of your ToneMatch® mixer.
#	Download and install the LI System Updater tool at https://www.bose.com/en_us/l1_downloads.html
#	Connect the mixer to your computer via the 2.0 USB Type-B port on the rear panel of your mixer. <br>See Figure 1.<br>[[File:T4S T8S firmware update figure 1.jpg|640px]]<br>
#	Connect your mixer to a power source via a ToneMatch cable or power supply and turn on your mixer.
#	To download the latest firmware, follow the appropriate link:
#* [[Media:T4_Update-master-v1.1.4-25adfea.zip|T4_Update-master-v1.1.4-25adfea.zip]] (extract to T4_Update-master-v1.1.4-25adfea.bos)
#* [[Media:T8_Update-master-v1.1.4-25adfea.zip|T8_Update-master-v1.1.4-25adfea.zip]] (extract to T8_Update-master-v1.1.4-25adfea.bos)
<!--
#*http://bosepro.link/t4s
#*http://bosepro.link/t8s
-->
#*;Important: move the *.bos files to the same folder as the L1 System Updater. This will make it easier to find the files when using the L1 System Updater.
#	Launch the L1 System Updater.
#	Click the "Update" button next to "T4S (or T8S) Firmware". See Figure 2.
<br>[[File:T4S T8S firmware update figure 2.jpg]]


;WARNING: Do NOT unplug or power off the mixer while it is updating.

;Important - Perform a Factory Reset to complete the Firmware Update.

{{T4S/T8S Factory Reset}}


PDF version [[Media:T4S T8S Firmware Update Instructions.pdf|T4S T8S Firmware Update Instructions]]
[[Category:T4S]]
[[Category:T8S]]



;All firmware updates are cumulative. You only need to update to the latest version.

== Version 1.1.4  ==

{| cellpadding="3" border="1"
|-
| Download 
| [[T4S T8S Firmware Update Instructions]]

|-
| Date 
| 2018/06/10
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.1.0|T4S/T8S ToneMatch® Mixer Firmware Version 1.1.0]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 
<!--
{{T4S T8S Firmware Links}}
-->

* [[File:T4_Update-master-v1.1.4-25adfea.zip|T4_Update-master-v1.1.4-25adfea.zip]] (extract to T4_Update-master-v1.1.4-25adfea.bos)
* [[File:T8_Update-master-v1.1.4-25adfea.zip|T8_Update-master-v1.1.4-25adfea.zip]] (extract to T8_Update-master-v1.1.4-25adfea.bos)


|-
| valign="top" | Related 
| N/A

|-
| Announcement 
| November 1, 2018
|-
| Release Notes 
| 
==== Fixes  ====
This is to fix the reverb: 
*Adding more reverb return gain
*Adjusting pre-delay settings
*Adjusting brightness default values. 

And corrects a misprint in the Preset
<br>Category: Utility
<br>Preset: 80Hz-5kHz

{{T4S/T8S Factory Reset}}
|}





;All firmware updates are cumulative. You only need to update to the latest version.

== Version 1.1.0  ==

{| cellpadding="3" border="1"
|-
| Download 
| [[T4S T8S Firmware Update Instructions]]

|-
| Date 
| 2018/06/10
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.0.10|T4S/T8S ToneMatch® Mixer Firmware Version 1.0.9]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 

{{T4S T8S Firmware Links}}

|-
| valign="top" | Related 
| N/A

|-
| Announcement 
| N/A
|-
| Release Notes 
| 
==== Fixes  ====
Update Factory Scenes for a better match to the T1® Factory Scenes.  Note: To get the new factory scenes, save any scenes you want to keep. Then you can do the factory reset (this sets all values back to the factory defaults).

{{T4S/T8S Factory Reset}}
|}






== Version 1.0.10  ==

{| cellpadding="3" border="1"
|-
| Download 
| [[T4S T8S Firmware Update Instructions]]

|-
| Date 
| 2018/04/25
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.0.9|T4S/T8S ToneMatch® Mixer Firmware Version 1.0.9]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 

{{T4S T8S Firmware Links}}

|-
| valign="top" | Related 
| N/A

|-
| Announcement 
| N/A
|-
| Release Notes 
| 
==== Fixes  ====
Update Factory Scenes for a better match to the T1® Factory Scenes. This was necessary because the units of measure on the T4S/T8S for some effects (e.g. Reverb) are different than on the {{T1}}
|}


== Version 1.0.9  ==

{| cellpadding="3" border="1"
|-
| Download 
| [[T4S T8S Firmware Update Instructions]]

|-
| Date 
| 2018/04/15
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.0.6|T4S/T8S ToneMatch® Mixer Firmware Version 1.0.6]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 

{{T4S T8S Firmware Links}}


|-
| valign="top" | Related 
| N/A

|-
| Announcement 
| N/A
|-
| Release Notes 
| 
==== Fixes  ====
More improvements to the USB A music playback. Support for '''more''' types of USB keys
|}

== Version 1.0.6  ==

{| cellpadding="3" border="1"
|-
| Download 
| [[T4S T8S Firmware Update Instructions]]

|-
| Date 
| 2018/03/15
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.0.2|T4S/T8S ToneMatch® Mixer Firmware Version 1.0.2]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 

{{T4S T8S Firmware Links}}

|-
| valign="top" | Related 
| N/A

|-
| Announcement 
| N/A
|-
| Release Notes 
| 
==== Fixes  ====
Improvements to the USB A music playback. Support for more types of USB keys


|}


== Version 1.0.4  ==

{| cellpadding="3" border="1"
|-
| Download 
| [[T4S T8S Firmware Update Instructions]]

|-
| Date 
| 2018/03/01
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.0.2|T4S/T8S ToneMatch® Mixer Firmware Version 1.0.2]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 

{{T4S T8S Firmware Links}}

|-
| valign="top" | Related 
| N/A

|-
| Announcement 
| N/A
|-
| Release Notes 
| 
==== Fixes  ====
Improvements to the Reverb on Aux 1 Output


|}

<br> 

== Version 1.0.3 ==
Internal release, this is not available for download.
=== Release Notes  ===

==== Fixes  ====
Improved performance on some effects

== Version 1.0.2  ==

{| cellpadding="3" border="1"
|-
| Download
| No longer available - please use the latest version above.
|-
| Date 
| 2018/02/15
|-
| Replaces 
| [[{{PAGENAME}}#Version_1.0.1|T4S/T8S ToneMatch® Mixer Firmware Version 1.0.1]]
|-
| Recommended for 
| All T4S/T8S owners
|-
| System Requirements: 
| 
{{L1 Updater}} 

{{T4S T8S Firmware Links}}

|-
| valign="top" | Related 
| 
N/A

|-
| Announcement 
| N/A
|-
| Release Notes 
| 
=== Fixes  ===
Correct routing of Aux 1/2 on T4S


|}

<br> 

== Version 1.0.1  ==
Original factory release

{| cellpadding="3" border="1"
|-
| Download 
| Download - no longer available - please use the latest version above.

|-
| Date 
| 2018/02/01
|-
| Replaces 
| N/A
|-
| Recommended for 
| N/A
|-
| System Requirements: 
| 
N/A

|-
| valign="top" | Related 
| 
N/A

|-
| Announcement 
| N/A
|}





<noinclude>
----
<references />
[[Category:Downloads]]
[[Category:Firmware Updates]]
[[Category:T1]]
</noinclude>