PS1 Powerstand Connections/Line Out/XLR: Difference between revisions
Jump to navigation
Jump to search
m (→Line Outs (XLR balanced) for Channels 1 and 2: simplified wording about the location of the pad) |
m (→Line Outs (XLR balanced) for Channels 1 and 2: link to dasiy chain) |
||
| Line 1: | Line 1: | ||
== Line Outs (XLR balanced) for Channels 1 and 2 == | == Line Outs (XLR balanced) for Channels 1 and 2 == | ||
* post trim (+4 dBu nominal) | * post trim (+4 dBu nominal) | ||
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). | For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). | ||
[[Image:PS1LineOutXLR.jpg]] | [[Image:PS1LineOutXLR.jpg]] | ||
This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to connect one {{l1 nl}} to another please see: | |||
[[PS1 Powerstand / Daisy Chain]] | |||
---- | ---- | ||
<references/> | <references/> | ||
[[category: | [[category:L1® System]] | ||
[[category:PS1 Powerstand]] | [[category:PS1 Powerstand]] | ||
[[category:PS1 Powerstand Connections]] | [[category:PS1 Powerstand Connections]] | ||
Latest revision as of 18:46, 31 December 2008
Line Outs (XLR balanced) for Channels 1 and 2
- post trim (+4 dBu nominal)
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal).
This is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to connect one L1® to another please see: PS1 Powerstand / Daisy Chain