Difference between revisions of "Effects/Lexicon/MX200"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (If using one {{PS1}} just use shown connections shown in the top half of the picture. If using two {{PS1}s then use bottom half as well.)
({{:PS1 Powerstand/Effects/Serial}})
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
=== Connections at the {{PS1}} ===
+
== Lexicon MX200 Reference ==
Serial Effects - Excerpt from the {{PS1}} Manual
 
 
 
http://bose.infopop.cc/eve/forums/a/ga/ul/1411053732/inlineimg/Y/effectsSerial%5B1%5D.gif
 
 
 
[[Image:PS1Channel1Insert.png]]
 
 
 
=== Insert Cable ===
 
==== Photo ====
 
{{:Insert Cable}}
 
 
 
==== Insert Cable Connections to the {{PS1}} ====
 
[[Image:Insert Cable Connections.png]]
 
 
 
 
 
== Lexicon MX200 Specific Notes ==
 
 
Links
 
Links
 
* [http://www.lexiconpro.com/Product_Downloads/MX200Manual_B.pdf Lexicon MX200 Users Manual]
 
* [http://www.lexiconpro.com/Product_Downloads/MX200Manual_B.pdf Lexicon MX200 Users Manual]
Line 21: Line 6:
  
 
=== Connections at the Lexicon MX200  ===
 
=== Connections at the Lexicon MX200  ===
If using one {{PS1}} just use shown connections shown in the top half of the picture. If using two {{PS1}s then use bottom half as well.
+
If using one {{PS1}} just use shown connections shown in the top half of the picture. If using two {{PS1}}s then use bottom half as well.
  
 
[[Image:LexiconMX200Connect.png]]
 
[[Image:LexiconMX200Connect.png]]
Line 40: Line 25:
  
 
[[Image:LexiconMX200Serial.gif]]
 
[[Image:LexiconMX200Serial.gif]]
 +
 +
{{:PS1 Powerstand/Effects/Serial}}
  
 
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/5841038914?r=5841038914#5841038914 Original post in the Bose® Musicians Community Message Boards]  
 
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/5841038914?r=5841038914#5841038914 Original post in the Bose® Musicians Community Message Boards]  

Latest revision as of 13:41, 26 December 2006

Lexicon MX200 Reference

Links

With the Lexicon MX200 you can use two channels when you operate independently. These illustrations are based on using both channels to support two PS1 Power Stand (Classic) / Model Is.

Connections at the Lexicon MX200

If using one PS1 Power Stand (Classic) / Model I just use shown connections shown in the top half of the picture. If using two PS1 Power Stand (Classic) / Model Is then use bottom half as well.

LexiconMX200Connect.png

Routing with Two PS1 Power Stand (Classic) / Model Is

Front Panel

LexiconMX200Routing01.gif

Documentation (Page 12 of the manual)

LexiconMX200RoutingDualMono.gif

Controlling the Wet/Dry Mix

Using the terminology from page 7 of the Lexicon MX200 Users Manual you are making a Serial connection. This mean that you will control the wet/dry mix using the mix controls (11 and 12) on the front panel. The Lexicon manual suggests that you may want to use a parallel connection for reverb, (and you can do this with the PS1 Power Stand (Classic) / Model I you will have to use Channel 3 or 4 for the return signal). There is advantage to this as you will still have to control the amount of effect (reverb) being sent to the {{PS1} from the effects unit. It is probably simpler to use the serial method and the mix controls on the Lexicon unit to manage how much reverb is applied to the signal.

LexiconMX200Mix.gif

Setting Mix Controls

From page 8 in the Lexicon MX200 Users Manual. Note - manual uses Electric Guitar as example but should be applicable to to PS1 Power Stand (Classic) / Model I.

LexiconMX200Serial.gif


Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

PS1InsertParallela.png

Insert Cable

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable


A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.

TipRingSleevePS1.gif

and this is connected to one of the PS1 Powerstand Insert Points

Channel 1 and Channel 2 Insert Points (blue)



There is more discussion in the Original post in the Bose® Musicians Community Message Boards