T1 ToneMatch® Audio Engine to Compact: Difference between revisions
mNo edit summary |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<includeonly>You can connect a {{T1}} to {{Compact}} | <includeonly>You can connect a {{T1}} to {{Compact}} | ||
</includeonly> | </includeonly> | ||
<noinclude> | |||
Here is an | == {{T1}} to {{Compact}} == | ||
</noinclude> | |||
Here is an excerpt from page 12 of the {{Compact Owners Guide}} | |||
[[Image:CompactOwnersGuideT1Connection.gif]] | [[Image:CompactOwnersGuideT1Connection.gif]] | ||
| Line 8: | Line 10: | ||
Connect FROM {{T1}} Master or Aux Output using ¼ inch jack connections. | Connect FROM {{T1}} Master or Aux Output using ¼ inch jack connections. | ||
Connect TO the [[L1%C2%AE_Compact#Channel_2|Compact Channel 2]] volume straight up (12:00 o'clock to 1:00 o'clock) for good results. You can turn it up higher, but if you see the light on the Compact | Connect TO the [[L1%C2%AE_Compact#Channel_2|Compact Channel 2]] volume straight up (12:00 o'clock to 1:00 o'clock) for good results. You can turn it up higher, but if you see the light on the Compact solid red (flickers of red are okay) or you hear distortion, turn down the volume on the Compact. | ||
<!-- | <!-- | ||
[[T1_ToneMatch%C2%AE_Audio_Engine_/_1/4_inch_Output_Connections_to_L1%C2%AE_Family_Members#L1.C2.AE_Compact|T1® to Compact]] | [[T1_ToneMatch%C2%AE_Audio_Engine_/_1/4_inch_Output_Connections_to_L1%C2%AE_Family_Members#L1.C2.AE_Compact|T1® to Compact]] | ||
| Line 17: | Line 19: | ||
=== Channel 2 Connection from {{T1}} Details === | === Channel 2 Connection from {{T1}} Details === | ||
Connect the {{T1}} Master output {{Compact}} channel 2. | |||
[[File:T1MasterOutput.png]] | |||
[[Image:Compact Channel 2 Line Level.png]] | [[Image:Compact Channel 2 Line Level.png]] | ||
<noinclude>For more general information see: {{T1}} and {{Compact}} | Turn the Channel 1 volume all the way down (fully counterclockwise) unless you have a microphone attached to it. | ||
<noinclude> | |||
{{Two T1®s to Compact}} | |||
For more general information see: {{T1}} and {{Compact}} | |||
---- | ---- | ||
[[Category:Compact]] | [[Category:Compact]] | ||
Latest revision as of 18:49, 14 August 2019
T1 ToneMatch Audio Engine to L1 Compact
Here is an excerpt from page 12 of the L1® Compact Owner's Guide (pdf format)
Connect FROM T1 ToneMatch Audio Engine Master or Aux Output using ¼ inch jack connections.
Connect TO the Compact Channel 2 volume straight up (12:00 o'clock to 1:00 o'clock) for good results. You can turn it up higher, but if you see the light on the Compact solid red (flickers of red are okay) or you hear distortion, turn down the volume on the Compact.
¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)
A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection.
¼ Inch Tip-Ring-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)
This should work fine but a balanced connection (immediately above) is preferred especially if you will have cable runs in excess of 20 feet (6 meters) or if you hear line noise, hum or hiss.
Channel 2 Connection from T1 ToneMatch Audio Engine Details
Connect the T1 ToneMatch Audio Engine Master output L1 Compact channel 2.
Turn the Channel 1 volume all the way down (fully counterclockwise) unless you have a microphone attached to it.
Two T1®s to a Single Compact
Two T1®s to Separate Inputs on Compact Channel 2
Compact Channel 2 detail
Suggested by Tom the Guitar Guy[1]
Daisy Chain Two T1®s to Compact Channel 2
Compact Channel 2 detail
- ↑ Tom the Guitar Guy in the Bose L1® Forum
For more general information see: T1 ToneMatch Audio Engine and L1 Compact