Difference between revisions of "Mixer to ToneMatch Mixer"
(Created article) |
m |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
| − | + | ;Main Channels 1, 2, 3, 4 (,5, 6, 7, 8) | |
If you connect the third party mixer to the main channels you can use: | If you connect the third party mixer to the main channels you can use: | ||
| Line 18: | Line 18: | ||
| − | + | ;Aux Inputs 5, 6 (9, 10 (T8S)) | |
If you connect the third party mixer to the Aux inputs you can use: | If you connect the third party mixer to the Aux inputs you can use: | ||
| Line 31: | Line 31: | ||
Choose the channels that best suit your needs. | Choose the channels that best suit your needs. | ||
| − | + | ;Summary | |
| − | |||
* If you need signal processing use two of the main channels | * If you need signal processing use two of the main channels | ||
* If you will do all the signal processing and manage the volume on the third party mixer, you can use the Aux inputs | * If you will do all the signal processing and manage the volume on the third party mixer, you can use the Aux inputs | ||
| + | |||
| + | ---- | ||
| + | [[Category:T4S]] | ||
| + | [[Category:T8S]] | ||
| + | [[Category:Mixer]] | ||
| + | [[Category:DJ]] | ||
Latest revision as of 05:33, 2 December 2018
Connect a third party mixer with left and right outputs to your ToneMatch Mixer[1]. You can use two of the main channels (T4S ToneMatch mixer channels 1, 2, 3, 4 or T8S ToneMatch mixer channels 1, 2, 3, 4, 5, 6, 7, 8.
- Main Channels 1, 2, 3, 4 (,5, 6, 7, 8)
If you connect the third party mixer to the main channels you can use:
- The Master Volume control
- The Pan/Aux to direct the signals to left and right outputs
- The trim controls to optimize the signal output from the mixer to match the inputs of the T4S
- The channel volume controls
- Presets (e.g., DJ / High Volume Music)
- zEQ (tone controls)
- ParaEQ (parametric EQ)
- Reverb
- Aux Outputs
- XLR to XLR cables OR XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables
- Aux Inputs 5, 6 (9, 10 (T8S))
If you connect the third party mixer to the Aux inputs you can use:
- The Master Volume control
- The Pan/Aux to direct the signals to left and right outputs
- XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables
Choose the channels that best suit your needs.
- Summary
- If you need signal processing use two of the main channels
- If you will do all the signal processing and manage the volume on the third party mixer, you can use the Aux inputs