Difference between revisions of "Dynamic Microphones"
m |
m |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{S1 Pro icon}} | + | {{S1 Pro icon}}{{S1 Pro+ icon}} |
| − | + | == Compatibility == | |
| − | + | This list will be of interest mainly for {{S1 Pro}} and {{S1 Pro+}} owners because Dynamic microphones do not require phantom power. The {{S1 Pro}} and {{S1 Pro+}} do not provide phantom power. However, any of the microphones listed on this page will work with {{S1 Pro}} and {{S1 Pro+}} and L1 family of products. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | == Sensitivity == | |
| − | + | Microphones with higher sensitivity will tend to sound louder than those with lower sensitivity. While sensitivity is not an indicator of quality or gain-before-feedback, it can impact how loud the microphone sounds through the {{S1 Pro}} and {{S1 Pro+}}. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | See also: [[Review_/_Microphone_/_Various|Microphone Review]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | = Dynamic Microphones for Portable PA Use = | |
| − | + | ||
| − | + | This table compares popular dynamic microphones used with systems like the {{S1 Pro}} and {{S1 Pro+}} and L1 models. Column headers and pattern labels include footnote-style links to the [[#Glossary_of_Terms|glossary]] for easy reference. Click a column header to sort. | |
| − | + | ||
| − | + | {| class="wikitable sortable" | |
| + | ! Manufacturer [[#Glossary_of_Terms|¹]] | ||
| + | ! Model [[#Glossary_of_Terms|¹]] | ||
| + | ! Sensitivity (mV/Pa) [[#Glossary_of_Terms|²]] | ||
| + | ! Sensitivity (dBV/Pa) [[#Glossary_of_Terms|²]] | ||
| + | ! Polar Pattern [[#Glossary_of_Terms|³]] | ||
| + | |- | ||
| + | | Audix || OM2 || 1.60 || -55.9 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Audix || OM3 || 1.60 || -55.9 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Audix || OM3xb || 2.50 || -52.0 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Audix || OM5 || 2.00 || -54.0 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Audix || OM6 || 1.50 || -56.5 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Audix || OM7 || 0.80 || -61.9 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Beyerdynamic || M88 || 2.90 || -50.7 || [[#Glossary_of_Terms|Hypercardioid³]] | ||
| + | |- | ||
| + | | Electro-Voice || N/D767A || 3.10 || -50.2 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Electro-Voice || N/D86 || 2.40 || -52.4 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Electro-Voice || N/D96 || 3.30 || -49.6 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Rode || M1 || 1.60 || -55.9 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || e 835 || 2.70 || -51.4 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || e 845 || 1.80 || -54.9 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || e 935 || 2.80 || -51.1 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || e 945 || 2.00 || -54.0 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || MD 421-II || 2.00 || -54.0 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || MD 431-II || 2.00 || -54.0 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || MD 435 || 1.80 || -54.9 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || MD 441 || 1.80 || -54.9 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Sennheiser || MD 445 || 1.60 || -55.9 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Shure || Beta 58 || 2.60 || -51.7 || [[#Glossary_of_Terms|Supercardioid³]] | ||
| + | |- | ||
| + | | Shure || KSM8 || 2.66 || -51.5 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |- | ||
| + | | Shure || SM58 || 1.85 || -54.6 || [[#Glossary_of_Terms|Cardioid³]] | ||
| + | |} | ||
| + | |||
| + | == Glossary of Terms == | ||
| + | |||
| + | '''¹ Manufacturer & Model:''' | ||
| + | Refers to the company and specific microphone designation. Grouping by manufacturer makes comparisons easier. | ||
| + | |||
| + | '''² Sensitivity (mV/Pa or dBV/Pa):''' | ||
| + | Indicates the output voltage of the microphone at 94 dB SPL. | ||
| + | * '''mV/Pa''' – Millivolts per Pascal, a linear scale. | ||
| + | * '''dBV/Pa''' – Decibels relative to 1 Volt, a logarithmic scale used in pro audio specs. | ||
| + | |||
| + | Higher sensitivity means a louder signal, but doesn't guarantee better tone or less feedback. | ||
| + | |||
| + | '''³ Polar Pattern:''' | ||
| + | How the microphone picks up sound from different directions: | ||
| + | * '''Cardioid''' – Primarily from the front, with some side rejection. | ||
| + | * '''Supercardioid''' – Tighter front pickup and greater rear rejection. | ||
| + | * '''Hypercardioid''' – Extremely directional; rejects more from the sides and rear. | ||
| + | |||
| + | == Notes == | ||
| + | |||
| + | * Very low-sensitivity mics (e.g., OM7) may require more gain and aren’t ideal for [[S1 Pro]] or [[S1 Pro+]]. | ||
| + | * Condenser mics need phantom power — if not available, they won’t function. That is wny this list doesn't not include condenser microphones | ||
| + | * High-sensitivity mics (>3.0 mV/Pa) can feedback easily without proper gain management. | ||
| + | * Mics near 1.85 mV/Pa (like SM58) are good matches for open mic setups and inexperienced sound operators. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
---- | ---- | ||
[[Category:Microphone]] | [[Category:Microphone]] | ||
[[Category:S1 Pro]] | [[Category:S1 Pro]] | ||
| + | [[Category:S1 Pro+]] | ||
Latest revision as of 22:51, 10 October 2025
Contents
Compatibility
This list will be of interest mainly for S1 Pro system and S1 Pro+ owners because Dynamic microphones do not require phantom power. The S1 Pro system and S1 Pro+ do not provide phantom power. However, any of the microphones listed on this page will work with S1 Pro system and S1 Pro+ and L1 family of products.
Sensitivity
Microphones with higher sensitivity will tend to sound louder than those with lower sensitivity. While sensitivity is not an indicator of quality or gain-before-feedback, it can impact how loud the microphone sounds through the S1 Pro system and S1 Pro+.
See also: Microphone Review
Dynamic Microphones for Portable PA Use
This table compares popular dynamic microphones used with systems like the S1 Pro system and S1 Pro+ and L1 models. Column headers and pattern labels include footnote-style links to the glossary for easy reference. Click a column header to sort.
| Manufacturer ¹ | Model ¹ | Sensitivity (mV/Pa) ² | Sensitivity (dBV/Pa) ² | Polar Pattern ³ |
|---|---|---|---|---|
| Audix | OM2 | 1.60 | -55.9 | Hypercardioid³ |
| Audix | OM3 | 1.60 | -55.9 | Hypercardioid³ |
| Audix | OM3xb | 2.50 | -52.0 | Hypercardioid³ |
| Audix | OM5 | 2.00 | -54.0 | Hypercardioid³ |
| Audix | OM6 | 1.50 | -56.5 | Hypercardioid³ |
| Audix | OM7 | 0.80 | -61.9 | Hypercardioid³ |
| Beyerdynamic | M88 | 2.90 | -50.7 | Hypercardioid³ |
| Electro-Voice | N/D767A | 3.10 | -50.2 | Supercardioid³ |
| Electro-Voice | N/D86 | 2.40 | -52.4 | Supercardioid³ |
| Electro-Voice | N/D96 | 3.30 | -49.6 | Supercardioid³ |
| Rode | M1 | 1.60 | -55.9 | Cardioid³ |
| Sennheiser | e 835 | 2.70 | -51.4 | Cardioid³ |
| Sennheiser | e 845 | 1.80 | -54.9 | Supercardioid³ |
| Sennheiser | e 935 | 2.80 | -51.1 | Cardioid³ |
| Sennheiser | e 945 | 2.00 | -54.0 | Supercardioid³ |
| Sennheiser | MD 421-II | 2.00 | -54.0 | Cardioid³ |
| Sennheiser | MD 431-II | 2.00 | -54.0 | Supercardioid³ |
| Sennheiser | MD 435 | 1.80 | -54.9 | Cardioid³ |
| Sennheiser | MD 441 | 1.80 | -54.9 | Supercardioid³ |
| Sennheiser | MD 445 | 1.60 | -55.9 | Supercardioid³ |
| Shure | Beta 58 | 2.60 | -51.7 | Supercardioid³ |
| Shure | KSM8 | 2.66 | -51.5 | Cardioid³ |
| Shure | SM58 | 1.85 | -54.6 | Cardioid³ |
Glossary of Terms
¹ Manufacturer & Model: Refers to the company and specific microphone designation. Grouping by manufacturer makes comparisons easier.
² Sensitivity (mV/Pa or dBV/Pa): Indicates the output voltage of the microphone at 94 dB SPL.
- mV/Pa – Millivolts per Pascal, a linear scale.
- dBV/Pa – Decibels relative to 1 Volt, a logarithmic scale used in pro audio specs.
Higher sensitivity means a louder signal, but doesn't guarantee better tone or less feedback.
³ Polar Pattern: How the microphone picks up sound from different directions:
- Cardioid – Primarily from the front, with some side rejection.
- Supercardioid – Tighter front pickup and greater rear rejection.
- Hypercardioid – Extremely directional; rejects more from the sides and rear.
Notes
- Very low-sensitivity mics (e.g., OM7) may require more gain and aren’t ideal for S1 Pro or S1 Pro+.
- Condenser mics need phantom power — if not available, they won’t function. That is wny this list doesn't not include condenser microphones
- High-sensitivity mics (>3.0 mV/Pa) can feedback easily without proper gain management.
- Mics near 1.85 mV/Pa (like SM58) are good matches for open mic setups and inexperienced sound operators.