PS1 Powerstand Connections/Line Out/XLR: Difference between revisions

From Bose Portable PA Encyclopedia
Jump to navigation Jump to search
(first ed)
 
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
== XLR Line Outs Channels 1 and 2 ==
== Line Outs (XLR balanced) for Channels 1 and 2 ==
* post trim (+4 dBu nominal)
* post trim (+4 dBu nominal)
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). Most professional consoles will have a switchable -20 dB pad at the inputs to lower the input level if required.
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal).  


The XLR Line out is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to daisy-chain {{PS1}}s a [[pad]] is recommended.
<!--
[[Image:PS1LineOutXLR.jpg]]
[[Image:PS1LineOutXLR.jpg]]
-->
<html>
Try moving the mouse over the image below. If you have Java installed, you will see notes related to what you touch with the mouse.
<br />
<APPLET CODEBASE="http://bose.infopop.cc/eve/forums/,s,8206048934,a,ga,ul,5151001421,ic,Y/" CODE="Balloon.class" WIDTH="600" HEIGHT="421">
<PARAM NAME="IMAGE" VALUE="http://toonz.ca/bose/wiki/images/5/52/PS1LineOutXLR.jpg">
<PARAM NAME="HOTSPOT0" VALUE="0, 0,150, 200 ">
<PARAM NAME="HELPSTRING0" VALUE="Microphone or instrument input">
<PARAM NAME="HOTSPOT1" VALUE="175, 0,75, 200 ">
<PARAM NAME="HELPSTRING1" VALUE="Trim affects signal present at Insert point">
<PARAM NAME="HOTSPOT2" VALUE="251, 0,75, 200 ">
<PARAM NAME="HELPSTRING2" VALUE="Presets have no effect on Line out or Insert">
<PARAM NAME="HOTSPOT3" VALUE="326, 0,75, 200 ">
<PARAM NAME="HELPSTRING3" VALUE="Line out is post Trim, that is, only the Trim setting has any effect on what is passed to the Line Out">
<PARAM NAME="HOTSPOT4" VALUE="400,0, 75,200">
<PARAM NAME="HELPSTRING4" VALUE="Signal present at 1/2 Insert is affected by Trim and Channel volume on the Remote Control">
<PARAM NAME="HOTSPOT5" VALUE="500,200, 80,100">
<PARAM NAME="HELPSTRING5" VALUE="Volume on Remote affects 1/2 Insert, but NOT Line Out">
<PARAM NAME="ITEMCOUNT" VALUE="5">
</html>


This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to connect one {{l1 nl}} to another please see:
[[PS1 Powerstand / Daisy Chain]]
----
----
<references/>
<references/>
   
   


[[category:L1™ System]]
[[category:L1® System]]
[[category:PS1 Powerstand]]
[[category:PS1 Powerstand]]
[[category:PS1 Powerstand Connections]]
[[category:PS1 Powerstand Connections]]

Latest revision as of 18:46, 31 December 2008

Line Outs (XLR balanced) for Channels 1 and 2

  • post trim (+4 dBu nominal)

For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal).

This is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to connect one L1® to another please see: PS1 Powerstand / Daisy Chain

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=PS1_Powerstand_Connections/Line_Out/XLR&oldid=10277"