Difference between revisions of "Preset for Double Bass with Schertler DYN-B"
m (icons) |
(T1 Cross reference) |
||
Line 16: | Line 16: | ||
Notes: | Notes: | ||
− | * Presets 2.0 mentioned above | + | * [http://toonz.ca/bose/wiki/index.php?title=Presets_2.0 Presets 2.0] mentioned above |
** 60 Upright 3/4 Bass w/ Fishman pickup Basses | ** 60 Upright 3/4 Bass w/ Fishman pickup Basses | ||
** 83 50 Hz / 5 KHz Band Pass Utility | ** 83 50 Hz / 5 KHz Band Pass Utility | ||
+ | * {{T1 icon}}{{T1}} Preset equivalent to #83 above <br />Category: Utility<br />Preset: 50HZ-5kHz Bandpass | ||
+ | |||
* [http://www.schertler.com/prodotti_ing/pickups/double_bass_DYN-B.htm SChERtLER DYN-B] | * [http://www.schertler.com/prodotti_ing/pickups/double_bass_DYN-B.htm SChERtLER DYN-B] |
Latest revision as of 03:58, 18 February 2008
Quoting Monte from the Bose® Pro Portable PA Community
- ... #60 has been good to me but I have to drastically cut the mids on the remote. Sounds pretty great until it gets loud, and then the bass gets a little hollow. I ended up using #83 with the band pass, and instant great acoustic sound!! I ran flat on the eq and the sound was hands down the best live sound I have ever gotten.
- At the end of the night some of the guys from the Shoals were in and the keyboard and guitar turned up. The vocalist at the bar motioned I needed to turn up. Still sounded the same, but it was LOUD. Still sounded just like my bass sans amplification.
- Unless anyone does an EQ setting for the SChERtLER Dyn family (Hint?!?) this one works really well for me. It was actually better than using channel 3 with my dedicated Schertler acoustic preamp.
Notes:
- Presets 2.0 mentioned above
- 60 Upright 3/4 Bass w/ Fishman pickup Basses
- 83 50 Hz / 5 KHz Band Pass Utility
- T1 ToneMatch Audio Engine Preset equivalent to #83 above
Category: Utility
Preset: 50HZ-5kHz Bandpass