Difference between revisions of "T1 ToneMatch® Audio Engine to Two Model II Power Stands"
m |
m |
||
Line 2: | Line 2: | ||
[[Image:T1TwoModelII.png]] | [[Image:T1TwoModelII.png]] | ||
− | <table | + | <table width=1000><tr> |
− | <td | + | <td width=400 valign=top> |
+ | ;System 1 | ||
Connect the first system with the ToneMatch cable that came with the T1®. | Connect the first system with the ToneMatch cable that came with the T1®. | ||
* T1® ToneMatch port to Model II Power Stand ToneMatch port. | * T1® ToneMatch port to Model II Power Stand ToneMatch port. | ||
− | </td><td> | + | </td> |
+ | <td style="width:400px;vertical-align:top"> | ||
+ | ;System 2 | ||
Connect the second system with a ¼ inch jack Tip-Ring-Sleeve cable | Connect the second system with a ¼ inch jack Tip-Ring-Sleeve cable | ||
* T1® Master Output to Model II Power Stand Analog input | * T1® Master Output to Model II Power Stand Analog input | ||
+ | ** on the Model II Power Stand set the analog input trim to "3" and adjust as necessary to get a good balance with the other system. | ||
** For best results use a Tip-Ring-Sleeve (balanced) connection. <br />[[Image:TrsMtrsM.png]]<br />You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred). | ** For best results use a Tip-Ring-Sleeve (balanced) connection. <br />[[Image:TrsMtrsM.png]]<br />You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred). | ||
</td></tr> | </td></tr> |
Revision as of 11:49, 17 March 2013
Please note: Bose recommends that if you have two L1® Systems using the same source, that the L1®s be placed at least 20 feet apart (6 meters). This is to avoid [Multiple_Source_Interference]Multiple Source Interference]