Difference between revisions of "Template:Analog Input Trim"
(Created page with ";Setting the Trim Control # Set the '''Trim''' control on the power stand to the 0 (zero) position. # Connect the audio source to the Analog Input # Adjust the volume of the {...") |
m |
||
Line 9: | Line 9: | ||
# While playing/singing as loud as you will during your performance, increase the '''Trim''' level so that the '''Signal/Clip''' indicator glows green or yellow. Occasional flickers of red are okay. | # While playing/singing as loud as you will during your performance, increase the '''Trim''' level so that the '''Signal/Clip''' indicator glows green or yellow. Occasional flickers of red are okay. | ||
# If the '''Signal/Clip''' indicator glows solid red or you hear distortion, decrease the '''Trim''' level so that it glows only green or yellow. | # If the '''Signal/Clip''' indicator glows solid red or you hear distortion, decrease the '''Trim''' level so that it glows only green or yellow. | ||
+ | |||
+ | ---- | ||
+ | [[Category:Gain]] |
Latest revision as of 09:57, 1 October 2019
- Setting the Trim Control
- Set the Trim control on the power stand to the 0 (zero) position.
- Connect the audio source to the Analog Input
- Adjust the volume of the source device output to the reference or nominal output level.
- On analog consoles this may be marked as unity or 0 dB.
- On digital consoles this may be marked as -18 dBFS[1][2]. The exact value (-18 dBFS to -20 dBFS) may vary depending your location[3].
- Refer to the manual for the source device for details.
- If the source device does not have metering or indicators, set the output as high as you can without hearing distortion or seeing red indicator lights.
- While playing/singing as loud as you will during your performance, increase the Trim level so that the Signal/Clip indicator glows green or yellow. Occasional flickers of red are okay.
- If the Signal/Clip indicator glows solid red or you hear distortion, decrease the Trim level so that it glows only green or yellow.