Template:Use1/4: Difference between revisions

Revision as of 06:24, 21 December 2006

Use the ¼ inch phone jack (Tip-Sleeve) outputs to

The PS1 Powerstand, Channels 1 or 2 if you want to use the Presets and the Tone and Level Controls on the R1 Remote

OR

The PS1 Power Stand (Classic) / Model I Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs.
If you want to use the Balanced XLR outputs you will probably need a Pad for each channel.

@@ Line 1: / Line 1: @@
 Use the ¼ inch phone jack (Tip-Sleeve) outputs to
-*  the PS1 Powerstand, Channels 1 or 2 if you want to use the [[Presets]] and the Tone and Level Controls on the [[R1 Remote]]
+*  The PS1 Powerstand, Channels 1 or 2 if you want to use the [[Presets]] and the Tone and Level Controls on the [[R1 Remote]]
 <br /> OR
-*  the {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 and 2 open for other inputs.
+*  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs.
 * If you want to use the Balanced XLR outputs you will probably need a [[Pad]] for each channel.