Difference between revisions of "Template:Bass Line Out Model II Post Firmware 1.4"
m |
m |
||
Line 1: | Line 1: | ||
<noinclude>{{Style table.b2}}</noinclude> | <noinclude>{{Style table.b2}}</noinclude> | ||
== Bass Line Out: Model II post firmware 1.4 with System EQ 1.04 == | == Bass Line Out: Model II post firmware 1.4 with System EQ 1.04 == | ||
− | {{{panelImage|[[Image:ModelIIBassOutputs.png|Model II Bass Outputs]]}}} | + | {{{panelImage|[[Image:ModelIIBassOutputs.png|Model II Bass Outputs]]}}}[[Image:B2 Bass Level Switch.png|B2 Bass Level Switch]] |
Line 43: | Line 43: | ||
<td style="text-align:center;">0</td> | <td style="text-align:center;">0</td> | ||
<td>40Hz-200Hz</td> | <td>40Hz-200Hz</td> | ||
− | <td>B2 EQ</td> | + | <td>B2 EQ as though B2 attached and B2 Bass Level Switch set to Normal position</td> |
<td>Reference Level</td> | <td>Reference Level</td> | ||
<td>This presents the B2 EQ with the B2 Bass Level Switch set to the Normal position</td> | <td>This presents the B2 EQ with the B2 Bass Level Switch set to the Normal position</td> |
Revision as of 07:58, 30 June 2016
Bass Line Out: Model II post firmware 1.4 with System EQ 1.04
September 2012
Bose released Model II Power Stand Model II firmware 1.4 with System EQ 1.04 to support the B2. This supports B1s in the same way, and it introduced new support for the B2 Bass Module with the three position Bass Level Switch.
The behavior of the bass line out with the B2 Bass Module Bass Module outputs on the Model 1S and Model II are based on the philosophy that adding B2 Bass Modules should give the user more bass output immediately. This changes the tonal balance as soon as you add a second B2 using an PackLite® power amplifier model A1 connected to the Bass Line Out.
No cable plugged into the Bass Line out
B2 Bass Modules connected | Output | EQ | Bass Signal Gain | Notes |
---|---|---|---|---|
1 | 40Hz-200Hz | B2 specific EQ as set by the B2 Bass Level Switch ( + Normal - ) is present at the Bass Module Out and the Bass Line Out | Reference Level | There are three B2 EQ settings possible using the B2 Bass Level Switch ( + Normal - ) |
Cable connected to the Bass Line Out
B2 Bass Modules connected | Output | EQ | Bass Signal Gain | Notes |
---|---|---|---|---|
0 | 40Hz-200Hz | B2 EQ as though B2 attached and B2 Bass Level Switch set to Normal position | Reference Level | This presents the B2 EQ with the B2 Bass Level Switch set to the Normal position |
B2 | 40Hz-200Hz | B2 specific EQ as set by the B2 Bass Level Switch ( + Normal - ) is present at the Bass Module Out and the Bass Line Out |
Reference Level | If you are using a PackLite® power amplifier model A1 Extended Bass Package this is a total of two B2s (one on the A1 and one on the Power Stand) |