Difference between revisions of "ToneMatch Mixer Phantom Power to Tyros 5 Microphone Input"
m |
m |
||
Line 5: | Line 5: | ||
;Answer: Yes | ;Answer: Yes | ||
− | From the [ | + | From the [https://usa.yamaha.com/files/download/other_assets/2/330612/tyros5_en_om_a0.pdf Yamaha Tyros 5 Owners Manual] |
[[File:T1 Phantom to Tyros 4 mic input 1.png|400px]] | [[File:T1 Phantom to Tyros 4 mic input 1.png|400px]] |
Revision as of 13:35, 23 April 2019
- Question
- I have a Yamaha Tyros 5 that I run thru the Bose T1 tone match. The Keyboard has an XLR mic connection with no phantom power. I would like to use a condenser mic that needs phantom power. I would love to record using the harmonies on the keyboard. Now is it possible to connect and run the mic thru the input on Ch 1 with phantom power on the T1 tone match and run the out from ch1 to the keyboard would that work ?
Source: Connecting a phantom powered condenser mic to to Yamaha Tyros 5
- Answer
- Yes
From the Yamaha Tyros 5 Owners Manual
- Connect the microphone to the T1 Channel 1 XLR input
- Turn on Phantom Power
- Connect the T1 Channel 1 Preamp Output to the Tyros 5 microphone input using a 1/4 inch (6.3mm) Tip-Sleeve cable.
- It's not clear if the Tyros 5 microphone input requires a 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable so if the 1/4 inch (6.3mm) Tip-Sleeve cable is noisy you can try the 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable.
- On the T1, set the input trim so you get a solid green light.
- On the Tyros 5 set the input trim