Difference between revisions of "S1 Pro+ To L1 Pro"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 28: Line 28:
  
 
==== Set Up ====
 
==== Set Up ====
# Turn down the volume on the S1 Pro+ system - all channels.
+
# S1 Pro+ Turn down the volume on all channels.  
# On the L1 Pro, on input 3 (preferred), turn down the volume - all channels. :If using channels 1 or 2, set the Bass and Treble to 12:00 o'clock and set ToneMatch to Off, and Reverb all the way down.
+
# L1 Pro  
# Connect the S1 Pro+ Line Out (XLR connection) to L1 Pro Aux Input (input 3). The Aux Input is for line-level sources, and the best match for the line-level output of S1 Pro+. Use and XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable
+
#* Turn down the volume on all channels.
<br>[[File:S1 Pro+ to L1 Pro2.jpg|800px]]
 
<br>or use an XLR cable with a converter<br>[[File:XLR cable.jpg|300px]][[File:XLR Female to 14 TRS Adapter.jpg|200px]]
 
 
 
==== Levels ====
 
# On S1 Pro+, bring up the channel volumes to the desired levels
 
# On L1 Pro, bring up channel 3 volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+
 
If you connect to channels 1 or 2 instead of 3
 
 
#* Set Bass and Treble at 12:00 o'clock (flat)
 
#* Set Bass and Treble at 12:00 o'clock (flat)
 
#* Set Reverb off (see alternate connection below)  
 
#* Set Reverb off (see alternate connection below)  
 +
#* Set ToneMatch to Off
  
==== Alternate Connection ====
+
==== XLR Cable ====
You can use an XLR cable (mic cable) from S1 Pro+ to the L1 Pro channels 1 or 2 (XLR inputs).
+
Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2
<!--
+
[[File:S1 Pro+ to L1 Pro2.jpg|800px]]
[[File:S1 Pro+ Daisy ConnectionXLR.jpg|800px]]  
 
-->
 
XLR Cable
 
  
[[File:XLR cable.jpg|300px]]
+
==== XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve ====
 +
Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable
 +
[[File:S1 Pro+ to L1 Pro3.jpg|800px]]
  
 +
<br>or use an XLR cable with a converter<br>[[File:XLR cable.jpg|300px]][[File:XLR Female to 14 TRS Adapter.jpg|200px]]
  
The signal may clip excessively, overload, or be too high to control the volume. To attenuate (reduce) the signal, use a -20 dB or -30 dB [[Pad]]
+
==== Levels ====
 
+
# On S1 Pro+, bring up the channel volumes to the desired levels
 
+
# On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+
[[Pad]]
 
 
 
[[File:Pad.jpg|link=Pad|More about Pads]]
 
  
Click image for more information about Pads
 
 
----
 
----
 
[[Category:S1 Pro+]]
 
[[Category:S1 Pro+]]

Revision as of 23:39, 17 August 2024

S1 Pro+  This information is applicable to the S1 Pro+ system
L1 Pro This information is applicable to the L1 Pro


S1 Pro+ to L1 Pro

Connect an S1 Pro+ to an L1 Pro Right

The objective is to use the S1 Pro+ as the stage monitor facing the performer(s) and the L1 Pro will be the main loudspeaker for the audience; the Front of House system (FOH).

You will connect your microphone and or instruments to the S1 Pro+

Terms used

S1 Pro+ (stage monitor and mixer)
This is the S1 Pro+ to which you have connected your microphone and or instruments using inputs 1, 2, 3
L1 Pro (main loudspeaker for the audience - Front of House)
This is the L1 Pro to which you send the sound from S1 Pro

Set Up

  1. S1 Pro+ Turn down the volume on all channels.
  2. L1 Pro
    • Turn down the volume on all channels.
    • Set Bass and Treble at 12:00 o'clock (flat)
    • Set Reverb off (see alternate connection below)
    • Set ToneMatch to Off

XLR Cable

Use an XLR cable (e.g., microphone cable) to connect the S1 Pro+ Line Out to L1 Pro channel 1 or 2 S1 Pro+ to L1 Pro2.jpg

XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve

Use an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable S1 Pro+ to L1 Pro3.jpg


or use an XLR cable with a converter
XLR cable.jpgXLR Female to 14 TRS Adapter.jpg

Levels

  1. On S1 Pro+, bring up the channel volumes to the desired levels
  2. On L1 Pro, bring up the channel volume to suit your application. Note: This will not necessarily match the same position on the dials as S1 Pro+