S1 Pro System Line Out

From Bose Portable PA Encyclopedia
Revision as of 21:07, 3 April 2021 by ST (talk | contribs) (→‎S1 Pro Daisy Chain (one to another))
Jump to: navigation, search

Overview and Specifications

The S1 Pro System Line Out is
¼ inch (6.3 mm) Tip-Ring-Sleeve jack: Nominal +2.4 dBu, Max +20 dBu
Output Impedance: 9.4 kilo-ohm kΩ
The Line Out is not affected by the Auto EQ. It's the combined output of all three channels (with volume controls, ToneMatch Presets, tone controls, and reverb) and is same whether the unit is in tilt-back, monitor, tabletop or on a speaker stand.
Notes
  • Using a Tip-Sleeve unbalanced cable will result in a drop in the audio level of -6dBu.
  • There is no limiter on this output so you may get more than the rated maximum, but it could sound distorted.

S1 Pro Daisy Chain (one to another)

S1 Pro Daisy Chain Settings Template:S1 Pro Daisy Chain Settings

Connecting the S1 Pro System to a Third Party Device

S1 Pro to a Third Party Device

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=S1_Pro_System_Line_Out&oldid=22215"