S1 Pro+ Wireless Microphone with T4S

Question

How do I use the T4S or T8S to control a microphone (and other inputs) with the S1 Pro+ Wireless Microphone Transmitter

Answer

1. You'll need
   1. S1 Pro+
   2. S1 Pro+ XLR Wireless Transmitter
   3. Dynamic microphone (this won't work with a microphone that requires phantom power)
   4. T4S or T8S (This could also work with a T1)
   5. ToneMatch Power Supply
   6. 1/4-inch (6.3 mm) Tip Ring Sleeve to two 1/4-inch (6.3 mm) Tip-Sleeve "Insert" Cable
   7. Optional 1/4-inch (6.3 mm) Tip Ring Sleeve cable
2. Watch this video.
   
   • Instead of a guitar as your sound source as shown in the video, you'll use your microphone with the XLR wireless transmitter.
   • Instead of a guitar pedal as shown in the video, you'll use your T4S to modify the sound of the microphone
3. Use the cable shown in the video
   • Connect the "Tip" connector to the T4S channel input you use for the microphone
   • Connect the "Ring" connector to the T4S Right Output.
   • Make sure all your T4S inputs are panned hard Right (or connect the Left output to the S1 Pro+ channel that you're not using for the wireless microphone using the optional 1/4-inch (6.3 mm) Tip Ring Sleeve cable mentioned above in point 1.7.)

---