Boss RC-30 Loop Station

Connections to a Compact

You could run your inputs to the Boss RC-30 Loop station and the output to Compact Channel 2 BUT, but you will miss out on the Preset.

More on this soon.

Connections to a Model I or Classic

The INSERT point works really well with my Boss RC-30 Loop Station.

I used a regular insert cable with the connections this way:

• I ran my input (in this case a microphone) into Model I (or Classic) Power Stand Channel 1

• Using a standard insert cable

I made the connections this way.

• Tip to Loop Station Output
• Ring to Loop Station Input

Connections to a Model II with T1

• T1® connected as usual using the ToneMatch® port to the Model II Power Stand
• T1® ¼ inch jack Master Output to the Boss RC-30
• Boss RC-30 output to Model II Power Stand Analog input.

This lets me do whatever I want on the T1® to create a loop track using all the processing of the T1® in front of it, and control the volume, balance, and effects of the looper separate from the T1® (direct to the Model II Power Stand) if I want to do that. The only thing that I don't think I can do gracefully, is a fade out the looper with the T1®.

---