Mixer to ToneMatch Mixer

Connect a third party mixer with left and right outputs to your ToneMatch Mixer. You can use two of the main channels (T4S ToneMatch mixer channels 1, 2, 3, 4 or T8S ToneMatch mixer channels 1, 2, 3, 4, 5, 6, 7, 8.

Main Channels 1, 2, 3, 4 (,5, 6, 7, 8)

If you connect the third party mixer to the main channels you can use:

• The Master Volume control
• The Pan/Aux to direct the signals to left and right outputs
• The trim controls to optimize the signal output from the mixer to match the inputs of the T4S
• The channel volume controls
• Presets (e.g., DJ / High Volume Music)
• zEQ (tone controls)
• ParaEQ (parametric EQ)
• Reverb
• Aux Outputs
• XLR to XLR cables OR XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables

Aux Inputs 5, 6 (9, 10 (T8S))

If you connect the third party mixer to the Aux inputs you can use:

• The Master Volume control
• The Pan/Aux to direct the signals to left and right outputs
• XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables

Choose the channels that best suit your needs.

Summary

• If you need signal processing use two of the main channels
• If you will do all the signal processing and manage the volume on the third party mixer, you can use the Aux inputs

---