Difference between revisions of "Boss RC-30 Loop Station"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
__TOC__
 +
 +
== Connections to a Compact ==
 +
You could run your inputs to the Boss RC-30 Loop station and the output to Compact Channel 2 BUT, but you will miss out on the Preset.
 +
 +
More on this soon.
 +
 +
 
== Connections to a Model I or Classic ==
 
== Connections to a Model I or Classic ==
The INSERT point works really well with my RC-30 Loop Station.
+
The INSERT point works really well with my Boss RC-30 Loop Station.
  
 
I used a regular insert cable with the connections this way:  
 
I used a regular insert cable with the connections this way:  
Line 19: Line 27:
 
[[Image:Model I Insert Point.png]]
 
[[Image:Model I Insert Point.png]]
  
 +
== Connections to a Model II with T1==
 +
 +
* T1® connected as usual using the ToneMatch® port to the Model II Power Stand
 +
* T1® ¼ inch jack Master Output to the Boss RC-30
 +
* Boss RC-30 output to Model II Power Stand Analog input.
 +
 +
This lets me do whatever I want on the T1® to create a loop track using all the processing of the T1® in front of it, and control the volume, balance, and effects of the looper separate from the T1® (direct to the Model II Power Stand) if I want to do that. The only thing that I don't think I can do gracefully, is a fade out the looper with the T1®.
  
 
----
 
----
Line 25: Line 40:
 
[[Category:Model I]]
 
[[Category:Model I]]
 
[[Category:Boss RC-30]]
 
[[Category:Boss RC-30]]
 +
[[Category:Boss]]

Latest revision as of 01:09, 28 March 2017

Connections to a Compact

You could run your inputs to the Boss RC-30 Loop station and the output to Compact Channel 2 BUT, but you will miss out on the Preset.

More on this soon.


Connections to a Model I or Classic

The INSERT point works really well with my Boss RC-30 Loop Station.

I used a regular insert cable with the connections this way:

  • I ran my input (in this case a microphone) into Model I (or Classic) Power Stand Channel 1
  • Using a standard insert cable

HosaSTP204.png


I made the connections this way.

  • Tip to Loop Station Output
  • Ring to Loop Station Input


RC-30InsertModelI.png

Model I Insert Point.png

Connections to a Model II with T1

  • T1® connected as usual using the ToneMatch® port to the Model II Power Stand
  • T1® ¼ inch jack Master Output to the Boss RC-30
  • Boss RC-30 output to Model II Power Stand Analog input.

This lets me do whatever I want on the T1® to create a loop track using all the processing of the T1® in front of it, and control the volume, balance, and effects of the looper separate from the T1® (direct to the Model II Power Stand) if I want to do that. The only thing that I don't think I can do gracefully, is a fade out the looper with the T1®.