Difference between revisions of "Dual Mono"
m |
m |
||
| Line 1: | Line 1: | ||
| − | < | + | {{Model II icon}}{{Compact icon}} |
| − | + | <div class="tocdiv"> | |
| − | + | <div>__TOC__</div> | |
| + | <div> | ||
| + | This article pertains to Dual Mono with {{L1}} systems. | ||
| + | : The {{L1}} systems have extremely wide horizontal dispersion. As a result, running multiple {{L1}} systems in the same sound field may result in overlap. The comments below are applicable in that context. | ||
| − | + | ||
| + | </div> | ||
| + | </div> | ||
| + | |||
| + | == Introduction == | ||
| + | |||
| + | ==Dual Mono== | ||
This is amplifying the same sound source through two separate loudspeakers. | This is amplifying the same sound source through two separate loudspeakers. | ||
| Line 9: | Line 18: | ||
Hilmar-at-Bose wrote: | Hilmar-at-Bose wrote: | ||
| − | :Dual mono is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization helps more with clarity much more than the added gain. | + | :Dual mono (with the {{L1}} systems) is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization helps more with clarity much more than the added gain. |
| − | :For a single performer/single source it's not quite so clear cut. One will be more accurate (i.e. sound is clearly located at performer's position, more consistent spectrum) and two will sound wider and more spacious. In the end, that is an artistic decision, depending on which one is closer to your artistic intent. | + | :For a single performer/single source it's not quite so clear cut. One will be more accurate (i.e. sound is clearly located at the performer's position, more consistent spectrum) and two will sound wider and more spacious. In the end, that is an artistic decision, depending on which one is closer to your artistic intent. |
:-- Source [https://www.bosepro.community/g/portable/topic/question-for-bose-techs?reply=18197182791860998#18197182791860998 Dual mono is usually not a good idea] | :-- Source [https://www.bosepro.community/g/portable/topic/question-for-bose-techs?reply=18197182791860998#18197182791860998 Dual mono is usually not a good idea] | ||
| − | + | ==Related reading== | |
*[[Can I Use It as a PA]]? (Cliff-at-Bose talks about Dual Mono) | *[[Can I Use It as a PA]]? (Cliff-at-Bose talks about Dual Mono) | ||
Revision as of 12:14, 14 March 2019
Contents
Introduction
Dual Mono
This is amplifying the same sound source through two separate loudspeakers.
Hilmar-at-Bose wrote:
- Dual mono (with the L1 systems) is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization helps more with clarity much more than the added gain.
- For a single performer/single source it's not quite so clear cut. One will be more accurate (i.e. sound is clearly located at the performer's position, more consistent spectrum) and two will sound wider and more spacious. In the end, that is an artistic decision, depending on which one is closer to your artistic intent.
- -- Source Dual mono is usually not a good idea
Related reading
- Can I Use It as a PA? (Cliff-at-Bose talks about Dual Mono)
- Live or PreRecorded / Stereo and *-Mono Chris Ickler's report on listening tests with four L1®s and multiple B1 Bass modules.
- Stereo / Mono / Distributed Systems Ken-at-Bose