Effects/Fostex/DE-1

From Bose Portable PA Encyclopedia
Jump to: navigation, search

Fostex DE-1

Reference

Connections at the Fostex DE-1

Excerpt from the Fostex DE-1 Manual Page 14 Fostex DE-1 SendReceive.gif

Controlling the Wet/Dry Mix

Excerpt from the Fostex DE-1 Manual Page 14 Fostex DE-1 Mix.gif


With the Fostex DE-1 you can use two channels when you operate independently. These illustrations are based on using Channel One in mono mode. Since the PS1 Power Stand (Classic) / Model I operates in mono, there is no particular advantage to running stereo.

Note - If you want to use two effects channels with the DE-1 you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).


Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

PS1InsertParallela.png

Insert Cable

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable


A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.

TipRingSleevePS1.gif

and this is connected to one of the PS1 Powerstand Insert Points

Channel 1 and Channel 2 Insert Points (blue)