Effects/Lexicon/MX200

From Bose Portable PA Encyclopedia
Revision as of 20:52, 25 December 2006 by ST (talk | contribs) (first ed - still need links to manual)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Fostex DE-1

Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

effectsSerial%5B1%5D.gif

Insert Cable

Photo

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable

Insert Cable Connections to the PS1 Power Stand (Classic) / Model I

Insert Cable Connections.png


Links

Connections at the Fostex DE-1

Excerpt from the Fostex DE-1 Manual Page 14 Fostex DE-1 SendReceive.gif

Controlling the Wet/Dry Mix

Excerpt from the Fostex DE-1 Manual Page 14 LexiconMX200Connect.png


With the Lexicon MX200 you can use two channels when you operate independently. These illustrations are based on using both channels to support two PS1 Power Stand (Classic) / Model Is.


Note - If you want to use two effects channels with the DE-1 you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).

There is more discussion in the Original post in the Bose® Musicians Community Message Boards