Effects/TC-Helicon/VoiceLive

From Bose Portable PA Encyclopedia
Revision as of 13:43, 26 December 2006 by ST (talk | contribs)
Jump to: navigation, search

TC-Helicon VoiceLive (Insert Method)

The VoiceLive Manual says "Note: Optimal connection to balanced equipment is achieved using balanced cables. However, if your equipment is NOT balanced you will generally have no problems."

Links

voiceLiveRearPanel.gif

Blue "Ring" is Send from the Bose System

Purple "Tip" is the Return to the Bose System

Important: VoiceLive Mic In Select button Make sure this is *not* pushed in as this overrides the routing through the Inputs/Ouputs documented above.

The VoiceLive Manual says "MIC IN SELECT Button - This selects the microphone for the Vocal input. When not pressed, VoiceLive defaults to the Line input."

voiceLiveRearPanel3.gif


Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

PS1InsertParallela.png

Insert Cable

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable


A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.

TipRingSleevePS1.gif

and this is connected to one of the PS1 Powerstand Insert Points

Channel 1 and Channel 2 Insert Points (blue)



See the Original post in the Bose® Musicians Community Message Boards