File:XLR to TRS mp106.jpg

From Bose Portable PA Encyclopedia
Revision as of 04:37, 6 December 2013 by ST (talk | contribs) (http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml Technical Description: The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS. This cable is typically used to plug XLR cord in)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
XLR_to_TRS_mp106.jpg(600 × 458 pixels, file size: 51 KB, MIME type: image/jpeg)

http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml

Technical Description:

The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS. This cable is typically used to plug XLR cord into balanced 1/4" TRS panel jacks commonly found on mixing consoles and processing equipment.

The Female XLR end is wired through to the 1/4" Male TRS end as follows:

   Pin One FXLR to Sleeve of MTRS
   Pin Two FXLR to Tip of MTRS
   Pin Three FXLR to Ring of MTRS

The 1/4" MTRS end is an EWI model P292S-BKG

The FXLR end is an EWI model ES3FB-GDP

The cable itself is constructed with 99.98% pure 22ga. high strand count copper conductors.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current04:37, 6 December 2013Thumbnail for version as of 04:37, 6 December 2013600 × 458 (51 KB)ST (talk | contribs)http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml Technical Description: The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS. This cable is typically used to plug XLR cord in
  • You cannot overwrite this file.

The following file is a duplicate of this file (more details):

Metadata