Difference between revisions of "Kemper Profiler"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (Factory Reset)
m
Line 54: Line 54:
 
[[File:Kemper Factory Content Performances.zip|Kemper Factory Content - Performances]]
 
[[File:Kemper Factory Content Performances.zip|Kemper Factory Content - Performances]]
  
#[[File:Kemper Factory Performances 1.png|400px|right]]Extract the zip file into a folder. There are seven Performances. These are files with the extension .performance.<br>
+
#[[File:Kemper Factory Performances 1.png|300px|right]]Extract the zip file into a folder. There are seven Performances. These are files with the extension .performance.<br>
 
#Open Rig Manager
 
#Open Rig Manager
 
#Arrange your desktop so you can see the contents of the folder and Rig Manager at the same time.
 
#Arrange your desktop so you can see the contents of the folder and Rig Manager at the same time.
#<br>[[File:Kemper Factory Performances 2.png|400px|right]]Drag the Performance files (one at a time) to any New Performance<br>All Performances<br>- My Profiler<br>- - Any Performance called New Performance<br>Warning: If you drag a Performance on top of an existing Performance, the existing one will be overwritten.
+
#<br>[[File:Kemper Factory Performances 2.jpg|400px|right]]Drag the Performance files (one at a time) to any New Performance<br>All Performances<br>- My Profiler<br>- - Any Performance called New Performance<br>Warning: If you drag a Performance on top of an existing Performance, the existing one will be overwritten.
 
#Put your Profiler into Performance Mode and enjoy.
 
#Put your Profiler into Performance Mode and enjoy.
  

Revision as of 22:10, 5 March 2021

Kemper Profiler This information is applicable to the Kemper Profiler

Kemper Profiling Amp (white)
Kemper Profiler Stage

Documentation

Documentation

Specifications

Technical Specifications

Power Consumption

Kemper Profiler Stage

  • Approximate draw 12 watts

The Kemper Profiler with Remote

  • Approximate draws approximately 17 watts

EQ in Output Section

Frequencies of the Output EQ

Bass Shelf 150 Hz (steep)

Mid Peak 600 Hz

Treble Shelf 2400 Hz

Presence Shelf 10000 Hz

The Tonestack (EQ in the Stack) is different and softer. There is interaction between the controls, so there are no defined frequencies, that can be announced.


Let me say an important word, as assumptions like on this thread keeps me busy since quite a time. There were about four threads in the last too weeks where I had to disagree to assumptions made by measurements Whenever you try to visualize a sonic behavior in means of scope, waveform display or frequency plot, to derive a deeper interpretation, you are very likely to fail. What you see is rarely what you hear. Trust your ears instead! It requires an immense knowledge to make qualified measurements and assumptions to derive better information by measurements and watching the results by your eyes, that you can simply hear with your ears.


In knowledge thereof, I rarely use scopes or analyzers for my development work, as I have failed to often by interpreting what I saw, even though I probably have the background knowledge needed. Instead I use my ears every day.


Source: C Kemper[1]

There are several related discussions that are equally interesting. Here are some examples.

This whole FRFR discussion is something, that I don't understand.


Linear speakers are never fully linear, that's true. But they try to. Modern studio monitors are very linear. I had the chance to participate in a comparison test of different studio monitors. The best of them sounded surprisingly equal, when different brands where compared.


However there is no absolute linearity, since the perceived frequency responce differs with the room we listen, and the angle to the speakers etc.


Is this a problem? Not at all. We all grew up listening to speakers here, there and everywhere, and in the car e.g. We listen to our favorite music by headphones, by kitchen radio, in our studio, by television. Some are better, some are worse. In the same way we have listened to our guitar heros. The speakers that we utilized have an impact to their studio guitar sound, as well as to the rest of the music. Did we bother? Not really. If we didn't like a speaker, it was due to the general perception of the music, not explicitly the guitar sound.


Do you guys make your own music recordings with guitar embedded? You will run into the same situation as every other recording: It will be listened to by a variety of speakers.


Now to the pure guitar sound of the Profiler, which is a studio sound. Still not a different situation. The guitar sound is colored by the speakers in the exact same way a piece of music would be colored with that guitar embedded. Would you ask for a complex EQ for correcting the frequency responce? Maybe yes. But the EQ should be set for the whole music, not just the guitar.


I am aware that many guitarists are not used to the studio sound of a guitar, even though they have listened to studio sounds all their live. Users sometimes state profiles do not sound good through their speakers. Well, that's the sound of a guitar amp in a studio, heard through your speakers. Get used to it! it's reality. Play along some music through the same speakers, and the sound will make sense.


Professional guitarists have got used to the studio sound of amps. They play in studios often, or by Inear monitors on stage. It is probably a similar situation like singers getting used to listen to their own recordings.


EQ presets for different FRFR simply do not make sense. There is no pro guitarist or producer, that has ever asked us for a complex EQ or Highcut or Lowcut or correction curves for linear speakers. They know about the everpresent relativity of frequency responces, that is colouring music in whole as well as guitar sounds in detail.


If you cannot handle linear speakers for your guitar sound, then play the profiler through a guitar speaker. But be aware that you have been listening to guitars by linear speakers for all your life, it's simply that the sound is odd to you when not embedded into music.


Source: C Kemper[2]


Profiles

Studio or Merged

Kemper Profiles How to Distinguish a Studio Profile from a Merged Profile

Quick Tips

Swap Up/Down Buttons

Swap Up/Down buttons on the Kemper Profiler Remote or the Kemper Stage


On the Profiler
Kemper Remote UpDown.jpg
  • Press the System button
  • Navigate to page 12/18 [Remote]
  • Press soft button 3 [Button Assignment]
  • Press soft button 1 [Switch Up & Down]
On the Stage
Kemper Stage UpDown.jpg
  • Press the System button
  • Navigate to page 4/11 [User Interface 2)
  • Press soft button 3 [Button Assignment]
  • Press soft button 1 [Switch Up & Down]



Wah Settings

Rig Manager Tips

Synchronize Two Instances of Rig Manager (Windows 10)

How do I transfer my Rig Manager settings from my desktop to my laptop (both running Rig Manager)?

You can use the Backup Rig Manager Content features on your desktop.

  1. Transfer the backup file to your laptop,
  2. Restore Rig Manager Backup on the laptop. You will find these functions in Tools.


How do I keep two computers running Rig Manager in sync?

There is no automated way to synchronize two instances of Rig Manager. You can do this manually in Windows. You may be able to do something similar on a Mac.

Kemper Rig Manager Sync.jpg

  1. Designate one computer as the Source and the other, the Destination.
  2. On the Source, navigate to C:\Users\<username>\AppData\Local\Kemper Amps\RigManager
    • Note: Folders for
      • Local Library (contains Rigs)
      • Prf (Contains Performances)
      • Prst (Contains Presets)
  3. On a shared drive or USB key, create the same three folders (Local Library, Prf, Prst)
      • Local Library
      • Prf
      • Prst
  4. Copy the contents of the files you want to replicate into the respective folders on the shared drive or USB key
  5. On the Destination, navigate to C:\Users\<username>\AppData\Local\Kemper Amps\RigManager
  6. Copy the contents of the shared drive or USB key to the respective folders on the destination



Performances

= Factory Content: Performances

Here are the Kemper Performances that are factory installed with new Profilers (all models) as of this date. I'm providing them here in case you need to re-install them.

File:Kemper Factory Content Performances.zip

  1. Kemper Factory Performances 1.png
    Extract the zip file into a folder. There are seven Performances. These are files with the extension .performance.
  2. Open Rig Manager
  3. Arrange your desktop so you can see the contents of the folder and Rig Manager at the same time.

  4. Kemper Factory Performances 2.jpg
    Drag the Performance files (one at a time) to any New Performance
    All Performances
    - My Profiler
    - - Any Performance called New Performance
    Warning: If you drag a Performance on top of an existing Performance, the existing one will be overwritten.
  5. Put your Profiler into Performance Mode and enjoy.

Factory Reset

From Kemper support:

1. First, consider creating a backup as this process will delete all user data and reset all global settings.

2. Upgrade to the current PROFILER operating system release software. If your Profiler is currently running a version older than 7.3.2 you need to update to that version first. You can find it here

https://www.kemper-amps.com/do…8/Older-Software-Versions

3. Switch the PROFILER Head or Rack model off and press and hold soft button 1 (left above the display) while powering it on into tuner mode. If you are a STAGE user press the soft button 1 and the SYSTEM button and power the unit on.

4. Keep holding the soft button until "System Maintenance " appears on the display.

5. In maintenance mode press "Recovery", "Init&Factory Content", "Yes", "Ok".

6. Then press the Reboot soft button and reboot or simply restart the PROFILER with the chicken-head knob.

Kemper Recovery Options

Kemper Profiler Recovery Options

Kemper Export/Import Performances

Kemper Export/Import Performances

Profiling Overview

KPA Profiling 1.png

KPA Profiling 2.png

KPA Profiling 3.png