Difference between revisions of "L1® Model II Power Stand Firmware Updates"

From Bose Portable PA Encyclopedia FAQ & Wiki
Jump to: navigation, search
m
m
Line 73: Line 73:
 
| Important: After step #3 below (firmware update) you need to restart your system to see the firmware version number update on the T1®. I have inserted instructions on how to do that into the screen shot below.
 
| Important: After step #3 below (firmware update) you need to restart your system to see the firmware version number update on the T1®. I have inserted instructions on how to do that into the screen shot below.
 
[[Image:Model II Firmware 1.4 Instructions.png]]
 
[[Image:Model II Firmware 1.4 Instructions.png]]
 +
 +
If you see this error message "The selected file contains the same version..."
 +
 +
click '''Yes'''
 +
 +
http://bose.infopop.cc/eve/forums/a/ga/ul/8030042556/inlineimg/Y/T1ModelIIFirmwareAndEQSameVersionWarning.png
 +
 +
 
|}
 
|}
  

Revision as of 14:49, 18 January 2013


Download.jpg

Firmware Prerequisites

You need a computer and a T1 ToneMatch Audio Engine to do firmware updates to your L1® Model II or Model 1S. If you don't have both of these, in the US, you can go to a Guitar Center store or a Bose Retail store for help. Please call ahead to make sure that someone in the store is expecting you.

Get the L1® Updater Software


These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software




Warning

If your firmware update is not successful - Caution

After you update the T1 ToneMatch Audio Engine or L1 Model II firmware, if you see a window on the PC that says the update was not successful, you should:

  1. turn the L1 and T1 off
  2. wait three seconds
  3. then turn the L1 and T1 back on

Do this before trying the update again!

This allows the L1 and T1s to re-establish a good copy of the software.

Source: If your firmware update is not successful - Caution


This Page Reviewed By Bose



Version 1.4

Download

L1® Model II Power Stand Firmware v 1.4 zip file version Corrected 2012/10/19

Please note: Updated version numbers will not be displayed until you restart your Model II Power Stand
.
Date 2012/09/27
Recommended for All L1 Model II owners with the B2 bass module.
Replaces L1® Model II Power Stand Firmware Updates Version 1.3
System Requirements:


These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software



  • PC
    • Microsoft Windows 98 or higher
    • USB 1.1 or higher
  • Mac
    • Mac OS X version 10.3 or higher
    • USB 2.0
Related

T1 ToneMatch® Audio Engine Firmware Updates Version 1.8 - Strongly Recommended if you don't already have 1.6.

Announcement Model II Power Stand Firmware version 1.4 makes the Model II Power Stand fully compatible with the B2 Bass Module's bass level control.
Changes
  • Firmware version 1.4 changes:
    1. Supports the B2 bass module (recognition and operation with the B2 Bass Level Switch for positions + and - ).
    2. No change to the operation of the Cylindrical Radiator.
    3. No change to the operation of the B1 bass module.
  • System EQ 1.04 changes:
    1. Support for the B2 bass module with different EQ for the B2 Bass Level Switch for positions + and - .
    2. No change to the operation of the Cylindrical Radiator.
    3. No change to the operation of the B1 bass module.
Notes Important: After step #3 below (firmware update) you need to restart your system to see the firmware version number update on the T1®. I have inserted instructions on how to do that into the screen shot below.

Model II Firmware 1.4 Instructions.png

If you see this error message "The selected file contains the same version..."

click Yes

T1ModelIIFirmwareAndEQSameVersionWarning.png


Changes

  • Firmware version 1.4 changes:
    1. Supports the B2 bass module (recognition and operation with the B2 Bass Level Switch for positions + and - ).
    2. No change to the operation of the Cylindrical Radiator.
    3. No change to the operation of the B1 bass module.
  • System EQ 1.04 changes:
    1. Support for the B2 bass module with different EQ for the B2 Bass Level Switch for positions + and - .
    2. No change to the operation of the Cylindrical Radiator.
    3. No change to the operation of the B1 bass module.



Version 1.3

Download Superceded by Firmware Version 1.4
Date 2008/02/27
Recommended for All L1 Model II owners
Replaces L1® Model II Power Stand Firmware Updates Version 1.1
System Requirements:


These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software



  • PC
    • Microsoft Windows 98 or higher
    • USB 1.1 or higher
  • Mac
    • Mac OS X version 10.3 or higher
    • USB 2.0
Related

T1 ToneMatch® Audio Engine Firmware Updates Version 1.7 - Strongly Recommended if you don't already have 1.6.

Announcement New L1® Model II Power Stand v1.3 Release

Installation Note

While you are installing the firmware update you will see a progress indicator on your computer screen in the

These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software



application. You will not see any sign that anything is happening on the screen of the T1 ToneMatch Audio Engine.

After the update completes, you will not see the new firmware number on the screen of the T1 ToneMatch Audio Engine. You will need to turn off the Power on the Power Stand and then turn it back on for the update to be recognized. You may have to restart the L1® Updater software too.


Model ll Power Stand Firmware1.3 post installation


Note: You should restart your computer after applying the firmware update before attempting any further updates to your T1.

Fixes

Version 1.3 fixes a rare issue with the power stand firmware update process. On earlier versions the power stand could be affected by two failed 'L1 model II Firmware' updates in a row.

We recommend upgrading from 'L1 model II Firmware' version 1.0 or 1.1

Related

It is highly recommended that you also download and apply T1 ToneMatch® Audio Engine Firmware Updates Version 1.8 if you don't already have 1.6.

Version 1.1

This is not required if you install L1® Model II Power Stand Firmware Version 1.3 above


Download L1™ Power Stand Firmware v 1.1

Date: 2007/08/10

Recommended for: All L1™ Model II Owners

Announcement: New T1 and L1™ Firmware

Fixes

System Hang / Blue Screen on T1™

Fixes a bug where some power outages could cause the L1 model II to hang. This is related to the problems reported on the message board where some users have experienced a loss of audio sometimes accompanied by a blank blue T1 LCD screen.[1]

Enhancements

Fan Behavior

We've also made some changes to the fan behavior to make it less noticeable.

Related

It is highly recommended that you also download and apply T1 ToneMatch® Audio Engine Firmware Updates Version 1.3

Prior Versions

  • Version 1.0 - Original as released from manufacturing (no download)



  1. Message Board reports of T1™ failures