L1® Model II Power Stand Firmware Updates
- turn the L1 and T1 off
- wait three seconds
- then turn the L1 and T1 back on
Do this before trying the update again!
This allows the L1 and T1s to re-establish a good copy of the software.
|Download||L1® Model II Power Stand Firmware v 1.3|
|Recommended for||All L1 Model II owners|
|Replaces||L1® Model II Power Stand Firmware Updates Version 1.1|
ToneMatch® Updater Software application. (two versions available)
If you have questions please see ToneMatch Updater discussion.
[[[T1 ToneMatch® Audio Engine Firmware Updates#Version 1.6|T1 ToneMatch® Audio Engine Firmware Updates Version 1.6]] - Strongly RecommendedNote - this is T1 ToneMatch Audio Engine firmware
|Announcement||New L1® Model II Power Stand v1.3 Release|
Version 1.3 fixes a rare issue with the power stand firmware update process. On earlier versions the power stand could be affected by two failed 'L1 model II Firmware' updates in a row.
We recommend upgrading from 'L1 model II Firmware' version 1.0 or 1.1
It is highly recommended that you also download and apply T1 ToneMatch® Audio Engine Firmware Updates Version 1.6
This is not required if you install L1® Model II Power Stand Firmware Version 1.3 above
Download L1™ Power Stand Firmware v 1.1
Recommended for: All L1™ Model II Owners
Announcement: New T1 and L1™ Firmware
System Hang / Blue Screen on T1™
Fixes a bug where some power outages could cause the L1 model II to hang. This is related to the problems reported on the message board where some users have experienced a loss of audio sometimes accompanied by a blank blue T1 LCD screen.
We've also made some changes to the fan behavior to make it less noticeable.
It is highly recommended that you also download and apply T1 ToneMatch® Audio Engine Firmware Updates Version 1.3
- Version 1.0 - Original as released from manufacturing (no download)
- Message Board reports of T1™ failures