Difference between revisions of "L1® System Holistic View"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (footnote link)
(applied templates / formatting)
Line 1: Line 1:
 
<big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>
 
<big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>
  
 +
== The {{L1}} System ==
 
[[Image:SpeakerPower01.gif]]
 
[[Image:SpeakerPower01.gif]]
  
Line 12: Line 13:
  
  
{{B1}}s
+
=== {{B1}}s ===
If you break the pair of B1s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>
+
If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>
  
If you don't use the B1s at all, the amp that is normally used to drive them is idle.
+
If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle.
 +
 
 +
=== {{L1 CR}} ===
  
 
The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.
 
The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.
This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 and the other drives the bottom half. Because the L1 should always be operated as a single unit, what happens when you break it down isn't important.
+
This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the {{L1 CR}} and the other drives the bottom half. Because the {{L1 CR}} should always be operated as a single unit, what happens when you break it down isn't relevant.
  
  

Revision as of 23:28, 4 September 2006

A Holistic View of the L1&trade [1]

The L1 System

SpeakerPower01.gif

The L1 Cylindrical Radiator® loudspeaker (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)[2] supplied by 500 watts.

The pair of B1 Bass Modules (Purple highlight) is a single bass loudspeaker with 4 (6.5 inch)[2] drivers supplied by 250 watts. [3]

That's 750 watts in total.

SpeakerPower02.gif


B1 Bass Modules

If you break the pair of B1 Bass Modules in half, and use just one of them, it draws 125 watts.[4]

If you don't use the B1 Bass Modules at all, the amp that is normally used to drive them is idle.

L1 Cylindrical Radiator® loudspeaker

The L1 Cylindrical Radiator® loudspeaker This is one loudspeaker that happens to break down into two pieces for travel. This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 Cylindrical Radiator® loudspeaker and the other drives the bottom half. Because the L1 Cylindrical Radiator® loudspeaker should always be operated as a single unit, what happens when you break it down isn't relevant.




  1. Originally appeared in the Bose® Pro Portable PA Community
  2. 2.0 2.1 Quoting Hilmar-at-Bose
  3. two B1 Bass Module loudspeakers connected draws up to 250 watts at 4 ohms
  4. one B1 Bass Module loudspeaker connected draws up to 125 watts at 8 ohms