L1® System Holistic View

From Bose Portable PA Encyclopedia
Revision as of 15:19, 4 September 2006 by ST (talk | contribs) (first ed)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A Holistic View of the L1&trade [1]

SpeakerPower01.gif

The L1 Cylindrical Radiator® loudspeaker (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)[2] supplied by 500 watts.

The pair of B1 Bass Modules (Purple highlight) is a single bass loudspeaker with 4 (6.5 inch)[2] drivers supplied by 250 watts. [3]

That's 750 watts in total.

SpeakerPower02.gif


B1 Bass Modules If you break the pair of B1s in half, and use just one of them, it draws 125 watts.[4]

If you don't use the B1s at all, the amp that is normally used to drive them is idle.

The L1 Cylindrical Radiator® loudspeaker This is one loudspeaker that happens to break down into two pieces for travel. This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 and the other drives the bottom half. Because the L1 should always be operated as a single unit, what happens when you break it down isn't important.




  1. [http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the Bose® Pro Portable PA Community
  2. 2.0 2.1 Quoting Hilmar-at-Bose
  3. two B1 Bass Module loudspeakers connected draws up to 250 watts at 4 ohms
  4. one B1 Bass Module loudspeaker connected draws up to 125 watts at 8 ohms