Difference between revisions of "Mixer / Behringer / UB1222FX-Pro"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (Mixer/Behringer/UBX 1222FX moved to Mixer/Behringer/UB1222FX-Pro: corrected model number)
m (emphasized using Mon Out for ¼ inch outputs.)
Line 9: Line 9:
  
 
== Summary ==
 
== Summary ==
Simplest thing that could possibly work.
+
Simplest thing that could possibly work.  
  
 
''' {{Use1/4}} '''
 
''' {{Use1/4}} '''
  
If you are running one L1™  you can try using the Mon Out. This is ¼ inch Tip-Sleeve that you can run to the Channel 1 or 2 ¼ inch Tip-Sleeve inputs.
+
If you are running one L1™  you can try using the '''Mon Out'''. This is ¼ inch Tip-Sleeve that you can run to the Channel 1 or 2 ¼ inch Tip-Sleeve inputs.
  
 
== Outputs ==
 
== Outputs ==
Line 23: Line 23:
  
 
=== ¼ Inch with suitable output===
 
=== ¼ Inch with suitable output===
for PS1 Powerstand Channel 1 or 2 inputs
+
Mixer '''Mon Out''' to the  PS1 Powerstand Channel 1 or 2 inputs  
  
 
{{RunTROrTRSUnbalanced}}
 
{{RunTROrTRSUnbalanced}}

Revision as of 23:07, 13 August 2007

Behringer UBX 1222FX Mixer

Summary

Simplest thing that could possibly work.

Use the ¼ inch phone jack (Tip-Sleeve) outputs to

If you are running one L1™ you can try using the Mon Out. This is ¼ inch Tip-Sleeve that you can run to the Channel 1 or 2 ¼ inch Tip-Sleeve inputs.

Outputs

XLR Balanced +4

The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.

{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}}


¼ Inch with suitable output

Mixer Mon Out to the PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

Tip-Ring-Sleeve to Tip-Ring-Sleeve

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.


Links: