Difference between revisions of "Mixer / Behringer / UB1222FX-Pro"
m |
(recommendation changed to XLR + Pad or XLR to ¼ inch phone jack) |
||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<big>''' Behringer UBX 1222FX Mixer'''</big> | <big>''' Behringer UBX 1222FX Mixer'''</big> | ||
| + | |||
== Summary == | == Summary == | ||
| − | Simplest thing that could possibly work | + | Simplest thing that could possibly work. |
| − | |||
| − | |||
| − | |||
| − | |||
| + | ''' {{UseXLR}} ''' | ||
== Outputs == | == Outputs == | ||
| Line 22: | Line 13: | ||
{{TooHotForPS1}} | {{TooHotForPS1}} | ||
| + | You may need to use a {{pad}}. | ||
| + | [[Image:Pad.jpg]] | ||
| + | |||
| + | === XLR Balanced Output to ¼ inch Phone Jack === | ||
| + | |||
| + | ==== XLR Female to ¼ Inch Tip-Sleeve ==== | ||
| + | [[Image:xlrFtxM.png|XLR Female to 1/4 Inch Tip Sleeve]] | ||
| + | |||
| + | This should work well if the mixer output is +4 dBU as this is a reasonable match for signal level, with any of the ¼ Inch inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced. There is no particular benefit to using this kind of cable as compared to the one below. | ||
| + | |||
| + | ==== XLR (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced) ==== | ||
| + | [[Image:xlrFtrsM.png|XLR female to Tip-Ring-Sleeve]] | ||
| + | |||
| + | This should work well if the mixer output is +4 dBU as this is a reasonable match for signal level, with any of the ¼ Inch inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced, so there is no particular advantage to using this balanced cable compared to an unbalanced cable. There is no particular benefit to using this kind of cable as compared to the one above. | ||
| − | |||
| − | |||
| − | |||
| Line 32: | Line 34: | ||
* [http://bose.infopop.cc/eve/forums/a/ga/ul/9981076553/UB1222FX-PRO_ENG_Rev_B.pdf Manual] | * [http://bose.infopop.cc/eve/forums/a/ga/ul/9981076553/UB1222FX-PRO_ENG_Rev_B.pdf Manual] | ||
* http://bose.infopop.cc/eve/forums/a/ga/ul/8501086553/inlineimg/Y/BehringerUBX1222FX.gif | * http://bose.infopop.cc/eve/forums/a/ga/ul/8501086553/inlineimg/Y/BehringerUBX1222FX.gif | ||
| + | |||
| + | <!-- | ||
* http://bose.infopop.cc/eve/forums/a/ga/ul/5751026663/inlineimg/Y/BehringerUB1222FX-PROMonOut.gif | * http://bose.infopop.cc/eve/forums/a/ga/ul/5751026663/inlineimg/Y/BehringerUB1222FX-PROMonOut.gif | ||
| − | + | --> | |
Revision as of 01:13, 14 August 2007
Behringer UBX 1222FX Mixer
Contents
Summary
Simplest thing that could possibly work.
You can use the XLR Balanced outputs.
Outputs
XLR Balanced +4
The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.
{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}}
You may need to use a Template:Pad.
XLR Balanced Output to ¼ inch Phone Jack
XLR Female to ¼ Inch Tip-Sleeve
This should work well if the mixer output is +4 dBU as this is a reasonable match for signal level, with any of the ¼ Inch inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced. There is no particular benefit to using this kind of cable as compared to the one below.
XLR (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)
This should work well if the mixer output is +4 dBU as this is a reasonable match for signal level, with any of the ¼ Inch inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced, so there is no particular advantage to using this balanced cable compared to an unbalanced cable. There is no particular benefit to using this kind of cable as compared to the one above.
Links:
