Difference between revisions of "Mixer / Mackie / DFX6"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
 
m (Mixer/Mackie/DFX6 moved to Mixer / Mackie / DFX6: naming convention)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
<!-- Use this an an outline for a mixer page -->
+
{{Classic icon}}{{Model I icon}}
<!-- Please link to external images, do not upload them to the server -->
+
<big>'''Mackie DFX Mixer'''</big>
<!-- Naming convention
+
== Summary ==
Mixer/Make/Model
+
 
e.g.
+
<table><tr><td>
Mixer/Mackie/DFX12
+
The simplest thing that could possibly work is to use the Mixer outputs shaded in Green NOT Red.
-->
+
</td><td>
<big>'''Mixer/Mackie/DFX6 Mixer'''</big>
+
[[Image:MackieDFXOutput00.gif]]
 +
</td>
 +
 
 +
</tr></table>
  
== Summary ==
 
Simplest thing that could possibly work.
 
  
 
''' {{Use1/4}} '''
 
''' {{Use1/4}} '''
Line 15: Line 16:
  
 
== Outputs ==
 
== Outputs ==
<!-- delete anything that is not applicable -->
 
 
=== XLR Balanced +4 ===  
 
=== XLR Balanced +4 ===  
  
Line 28: Line 28:
 
Links:
 
Links:
 
* [http://www.mackie.com/pdf/dfx_om.pdf Manual]
 
* [http://www.mackie.com/pdf/dfx_om.pdf Manual]
* http://bose.infopop.cc/eve/forums/a/ga/ul/9281046553/inlineimg/Y/MackieDFXOutput.gif
+
* [[Image:MackieDFXOutput01.gif]]
* link to an image from the manual
+
* [[Image:MackieDFXOutput03.gif]]
 
+
* [[Image:MackieDFXOutput02.gif]]
More Notes
 
 
 
 
 
 
 
  
 
----
 
----
 
<references/>
 
<references/>
 
+
[[category:Mackie]]
 
[[category:Mixer]]
 
[[category:Mixer]]

Latest revision as of 03:12, 21 December 2008

Classic This information is applicable to the L1® Classic
L1 Model I This information is applicable to the L1 Model I

Mackie DFX Mixer

Summary

The simplest thing that could possibly work is to use the Mixer outputs shaded in Green NOT Red.

MackieDFXOutput00.gif


Use the ¼ inch phone jack (Tip-Sleeve) outputs to


Outputs

XLR Balanced +4

The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.

{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}}

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

Tip-Ring-Sleeve to Tip-Ring-Sleeve

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.


Links: