Difference between revisions of "Mixer / Mackie / DFX6"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (setup for transclusion into dfx12 - basically the same unit)
m (Mixer/Mackie/DFX6 moved to Mixer / Mackie / DFX6: naming convention)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
{{Classic icon}}{{Model I icon}}
 +
<big>'''Mackie DFX Mixer'''</big>
 
== Summary ==
 
== Summary ==
  

Latest revision as of 03:12, 21 December 2008

Classic This information is applicable to the L1® Classic
L1 Model I This information is applicable to the L1 Model I

Mackie DFX Mixer

Summary

The simplest thing that could possibly work is to use the Mixer outputs shaded in Green NOT Red.

MackieDFXOutput00.gif


Use the ¼ inch phone jack (Tip-Sleeve) outputs to


Outputs

XLR Balanced +4

The nominal output of the XLR Balanced Outputs is too high for the XLR inputs on the PS1 Power Stand Channels 1 and 2. If you want to use balanced cables from the Mixer to Channels 1/2 on the L1 Classic or L1 Model I you may need to use a Pad to lower the signal level from the mixer.

{{#Click:Pad|Image:Pad.jpg|Attenuation Pad}}

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

Tip-Ring-Sleeve to Tip-Ring-Sleeve

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.


Links: