Difference between revisions of "Model II / Versions from Serial Number"
m |
m |
||
| Line 3: | Line 3: | ||
<br /> | <br /> | ||
<table><tr> | <table><tr> | ||
| − | <td>This is how to read the Serial Number to tell if your system was shipped with Firmware version 1.4 and System EQ 1.04 (both required to fully support the [[B2|B2 Bass Module]]). See below: | + | <td>This is how to read the Serial Number to tell if your system was shipped with Firmware version 1.4 and System EQ 1.04 (both required to fully support the [[B2|B2 Bass Module]]). |
| + | |||
| + | See below: | ||
</td><td> | </td><td> | ||
If you have a [[T1|T1 ToneMatch Audio Engine]] you can use it to check the Firmware and System EQ versions that are currently installed. If the Model II has been updated since it was manufactured, you need the T1® to read what is installed. | If you have a [[T1|T1 ToneMatch Audio Engine]] you can use it to check the Firmware and System EQ versions that are currently installed. If the Model II has been updated since it was manufactured, you need the T1® to read what is installed. | ||
Revision as of 14:32, 23 January 2014
| This is how to read the Serial Number to tell if your system was shipped with Firmware version 1.4 and System EQ 1.04 (both required to fully support the B2 Bass Module).
See below: |
If you have a T1 ToneMatch Audio Engine you can use it to check the Firmware and System EQ versions that are currently installed. If the Model II has been updated since it was manufactured, you need the T1® to read what is installed. |
Note: The grayed out characters may be different on your system. {{#img: image=ModelIISerialNumber.png | page=L1® Model II Power Stand Firmware Updates | width=80% | title=L1® Model II Power Stand Firmware Updates }}
If the underlined numbers are lower than 2250 then see L1® Model II Power Stand Firmware Updates
For more information on the Model II see: Model II