Difference between revisions of "Model II / Versions from Serial Number"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 1: Line 1:
 
{{Model II icon}}
 
{{Model II icon}}
<br />
 
<br />
 
<table><tr>
 
<td>This is how to read the Serial Number to tell if your system was shipped with Firmware version 1.4 and System EQ 1.04 (both required to fully support the [[B2|B2 Bass Module]]).
 
  
See below:
+
=== Use your Serial number to check versions when shipped ===
</td><td>
+
This is how to read the Serial Number to tell if your system was shipped with Firmware version 1.4 and System EQ 1.04 (both required to fully support the [[B2|B2 Bass Module]]).  
If you have a [[T1|T1 ToneMatch Audio Engine]] you can use it to check the Firmware and System EQ versions that are currently installed. If the Model II has been updated since it was manufactured, you need the T1® to read what is installed.
 
  
See:  [[Model II / Versions from T1®]]
 
</td>
 
</tr>
 
</table>
 
  
 
Note: The grayed out characters may be different on your system.  
 
Note: The grayed out characters may be different on your system.  
Line 21: Line 12:
  
 
For more information on the Model II see: [[Model II]]
 
For more information on the Model II see: [[Model II]]
 +
 +
=== Use your [[T1]] to check ===
 +
If you have a [[T1|T1 ToneMatch Audio Engine]] you can use it to check the Firmware and System EQ versions that are currently installed. If the Model II has been updated since it was manufactured, you need the T1® to read what is installed.
 +
 +
See:  [[Model II / Versions from T1®]]
  
 
----
 
----
 
[[Category:Model II]]
 
[[Category:Model II]]
 
[[Category:Firmware]]
 
[[Category:Firmware]]

Revision as of 14:36, 23 January 2014

L1 Model II This information is applicable to the L1®  Model II

Use your Serial number to check versions when shipped

This is how to read the Serial Number to tell if your system was shipped with Firmware version 1.4 and System EQ 1.04 (both required to fully support the B2 Bass Module).


Note: The grayed out characters may be different on your system. {{#img: image=ModelIISerialNumber.png | page=L1® Model II Power Stand Firmware Updates | width=80% | title=L1® Model II Power Stand Firmware Updates }}


If the underlined numbers are lower than 2250 then see L1® Model II Power Stand Firmware Updates

For more information on the Model II see: Model II

Use your T1 to check

If you have a T1 ToneMatch Audio Engine you can use it to check the Firmware and System EQ versions that are currently installed. If the Model II has been updated since it was manufactured, you need the T1® to read what is installed.

See: Model II / Versions from T1®